Advertisement
B.3.2 Network status
Telephone can obtain IP address from DHCP server in default mode. Enter WEB
interface to configure all related settings in accordance with real network
environment.
Select WAN port IP address obtainment modes including
WAN IP Mode
static/ DHCP/ PPPoE/ Bridge.
MAC Address Clone
Enable MAC address clone or not
NAT Enable
Activate NAT function or not.
VLAN Mode
Activate VLAN mode or not
VLAN ID
Set VLAN ID
If DNS mode is Manual, user needs to set primary DNS and
secondary DNS manually. If DNS mode is Auto, IP phone will
DNS Mode
obtain primary DNS and secondary DNS from DHCP server
automatically.
Primary DNS
The Primary DNS setting
Secondary DNS
The optional DNS setting
IP Address
The network port IP address
Subnet Mask
The network port subnet mask
Default Gateway
The network port default gateway
6
Note:
1) When telephone IP address is switched from DHCP to static mode, all
parameters such as IP address, Subnet Mask, Default Gateway and DNS need to
be set manually.
2) Save and apply switched IP address settings and reboot the phone for new IP
address obtainment. Make sure the network is normal during daily using.
B.3.3 SIP Account Setting
Phone regular usage ,only need to configure Proxy Server, Display Name , Phone
Number, Account, Password.
Set basic information from VoIP service supplier, like phone
Basic
number, account, password, SIP proxy, and etc.
Audio Configuration
Select audio format
Supplementary
Auxiliary function
Service Subscription
Call Waiting
Enable call waiting or not
Hot Line
Set hot line
MWI Enable
Enable MWI or not
Voice Mailbox
Voice Mailbox server
Numbers
MWI Subscribe
Support MWI subscription
Enable
Advertisement
