GROUNDING INSTRUCTIONS All grounded, cord-connected tools: in the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Page 3
WARNING Safety Note: Thoroughly Read Instruction Manual Prior to Operating Sander 1. WEAR eye protection. 2. SUPPORT work piece with backstop or worktable. 3. KEEP GUARDS IN PLACE and in working order. 4. REMOVE ADJUSTNG KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.
Page 4
HEX NUT W ASHER SPRING W ASHER 5/16 Hex. Hd. Scr Fig: 1 Fig: 3 The way to change sand band Fig: 2 Fig: 4 1. SANDING TABLE CAN BE ADJUSTED 90°- 1. STAND ASSEMBLY : CLAMP PART(A) 180° ,SEE FIG.4 AND PART(B) BY HEX NUT , WASER, SPRING WASER AND SCREW.
Page 5
Fig: 7 Fig: 5 FOR CONTOUR SANDING SEE FIG. 7 1.MITER GAUGE (A) CAN BE ADJUSTED 45°-90° AND CLAMPED BY HEX. HANDLE (B), SEE FIG.5 2.ADJUST MITER GAUGE(A)2.ADJUST MITER GAUGE(A) TO GET REQUIRED ANGLE GAUGE. Fig: 7A FOR CONTOUR SANDING SEE FIG. 7 Fig: 6 ADJUST ROLLER TO TARCK BELT SEE FIG.