Controls And Display; Front Panel Controls - E.F. Johnson Company 5100 SERIES Service Manual

Portable digital/analog vhf/uhf/800 mhz
Hide thumbs Also See for 5100 SERIES:
Table of Contents

Advertisement

CONVENTIONAL MODE
Function
Backlight
Clear/Secure
Displayed Information
High/Low Power
Home Zone
Individual ID Call
Keypad Lock
Keypad Programming
Monitor
Normal/Selective
Priority
Radio Wide Scan
Repeater Talk-Around
Reverse Top Display
Scan
Scan Edit
Talk Group Select
Tones On-Off
Zone Select

2.3 CONTROLS AND DISPLAY

2.3.1 FRONT PANEL CONTROLS

Speaker - The transceiver speaker is located behind
this grill. When a speaker/microphone is used, this
speaker is automatically disabled.
Microphone - The microphone is located in this area.
For best results, hold the transceiver 2-3 inches from
you mouth and speak at a normal conversational level.
Front Display - This is an 8-character, 14-segment
LCD (Liquid Crystal Display). This display backlight
can be programmed to turn on when any key is pressed
or when the Backlight option switch is pressed (see
Section 2.4.4). This display also contains nine status
indicators which are described in Section 2.3.4.
Table 2-1: Programmable Option Switch Functions
See Section:
2.4.4
2.4.13
2.6.2
2.6.10
2.4.9
2.6.16
2.4.6
2.9
2.6.4
2.6.6
2.6.13
2.5.3
2.6.9
2.3.4
2.5.2
2.5.9
2.6.16
2.4.11
2.4.8
SMARTNET/SmartZone Mode
Function
Backlight
Call Alert
Call Response
Clear/Secure
Home Zone
Keypad Lock
Message
Phone
Private Call
Radio Wide Scan
Reverse Top Display
Scan
Scan Edit
Site Lock (SmartZone only)
Site Search (SmartZone only)
Status
Tones On-Off
Zone Select
DTMF Keypad - The full keypad, 18-key models
include the keys required to dial telephone, unit ID,
and group ID numbers and also to enter numbers for
keypad programming.
F1 - F4 - These keys are available with both full and
limited keypad models, and they can be system oper-
ator programmed to control a specific function. The
key functions can be different for each operating mode
(see Section 2.2). In addition, there are keys used for
scrolling up or down in menus (
( ENT ) and clearing ( CLR ) information. Other
programmable option switches are located on the top
and side panels (see preceding information).
2-2
OPERATION
See Section:
2.4.4
2.7.7
2.7.4, 2.7.5
2.4.13
2.4.9
2.4.6
2.7.8
2.7.6
2.7.4, 2.7.5
2.5.3
2.3.4
2.5.2
2.5.9
2.7.14
2.7.14
2.7.9
2.4.11
2.4.8
) and entering
September 2001
Part No. 001-5100-001

Advertisement

Table of Contents
loading

Table of Contents