6. Clearing the Operation Info
6.1. Actions
• Displays the accumulated operating time of the unit, the number of times the power was switched on,
and the number of occurrences of each protection.
6.2. Operations
Remove all input/output terminals and the AC plug.
Connect the AC plug again and place the product in standby mode.
AVR-X1400H
· While holding down buttons "ZONE2 SOURCE" and "STATUS" simultaneously, press the power but-
ton to turn on the power.
AVR-S730H
· While holding down buttons "TUNER PRESET CH +" and "TUNE +" simultaneously, press the power
button to turn on the power.
PRODUCT MODE
When "PRODUCT MODE" appears on the display, release the button and press the "power" button and
"ZONE2 ON/OFF" to place the product in standby mode.
119