Operation Info Mode; Tuner Step Mode (E2 / E3 Only) - Denon AVR-S730H Service Manual

3-3. Operation Info Mode

3-3.1. Actions
This mode enables the unit to display the accumulated operating time, power On count and each pro-
tection count.
3-3.2. Starting up
AVR-X1400H
· While holding down buttons "ZONE2 SOURCE", "DIMMER" and "STATUS" simultaneously, press the
power button to turn on the power.
AVR-S730H
· While holding down buttons "TUNER PRESET CH+", "TUNE -" and "TUNE +" simultaneously, press
the power button to turn on the power.
Select the "4. OP INFO" using the "TUNER PRESET CH+/-" button, then press the "STATUS" button to
confirm.
3-3.3. Operations
Press the "STATUS" button after starting up this device in Operation Info mode.
The following information is displayed in the following order.
(a) Accumulated operating time
OP Time ______H
↑ Time display
"STATUS"
(b) Power On count
P.On Time______
↑ Count display
"STATUS"
(c) DC / ASO Protection count
DC:___/ASO:___
"STATUS"
(d) Thermal Protection (A/B) count
THM A:___/B:___
"STATUS"
(f) Current Protection count
Current:___
"STATUS"
(Returns to normal display)

3-4. TUNER STEP mode (E2 / E3 only)

3-4.1. Actions
This is a special mode for enabling reception STEP of the ANALOG TUNER to be changed.
3-4.2. Starting up
AVR-X1400H
· While holding down buttons "ZONE2 SOURCE", "DIMMER" and "STATUS" simultaneously, press the
power button to turn on the power.
AVR-S730H
· While holding down buttons "TUNER PRESET CH+", "TUNE -" and "TUNE +" simultaneously, press
the power button to turn on the power.
Select the "5. TUNER FRQ SET" using the "TUNER PRESET CH+/-" button, then press the "STATUS"
button to confirm.
3-4.3. Displays
Start up this unit in TUNER STEP mode, select the desired option using the "TUNER PRESET CH+/-"
button, then enter using the "STATUS" button.
The following information is displayed in the following order.
(a) AM9 kHz / FM50 kHz is selected
< AM9/FM50 >
"TUNER PRESET CH+"
(b) AM10 kHz / FM200 kHz is selected
< AM10/FM200 >
"STATUS"
(c) Press the power button to turn off the power.
(d) Press the power button to turn on the power.
116
"TUNER PRESET CH-"