Important Two-Component Information; Material Self-Ignition; Keep Components A And B Separate; Changing Materials - Graco RS Operation And Repair Manual

Important Two-Component Information

Important Two-Component Information

Material Self-ignition

Some materials may become self-igniting if applied
too thickly. Read material manufacturer's warnings
and material MSDS.
Keep Components A and B
Separate
Cross-contamination can result in cured material in
fluid lines which could cause serious injury or
damage equipment. To prevent cross-contamination
of the equipment's wetted parts, never interchange
component A (catalyst) and component B (resin)
parts.

Changing Materials

• When changing materials, flush the equipment mul-
tiple times to ensure it is thoroughly clean.
• Always clean the fluid inlet strainers after flushing.
• Check with your material manufacturer for chemical
compatibility.
6 3A0232ZAA