Connection Jacks (Rear) - Samsung HC-P4252W Owner's Instructions Manual

Y
O U R

Connection Jacks (Rear)

Use the rear panel jacks to connect an A/V component that will be connected continuously,
such as a VCR or a DVD player. For more information on connecting equipment, see pages
10~17.
ΠAntenna terminals
Two independent cables or antennas can be
connected to these terminals. Use "ANT 1 IN" and
"ANT 2 IN" terminals to receive a signal from VHF/
UHF antennas or your cable system.
Use the"ANT 1 OUT" terminal to send the signal
being received by the "ANT 1 IN" terminal out to
another component (such as a Cable Set-Top Box).
The PIP channel can be received only when a signal
source is connected to "ANT 1 IN".
´ Audio/Video Output jacks
Connect to the audio/video input jacks of a
recording VCR.
ˇ Video Input jacks
Connect to the video output jacks of VCRs, DVD
players and similar devices.
¨ Audio Input jacks
Connect to the audio output jacks of VCRs, DVD
players and similar devices.
8
N T V
E W
ˆ S-Video Input jack
Connect to S-VIDEO output jacks of an S-VHS VCR
or DVD player.
Ø∏ COMPONENT Input jacks
(Y, P , P , AUDIO-L/R)
B R
Connect to the audio and video outputs of DVD or
DTV Set-Top Box. 480i/480p/1080i Y,P
video signal outputs are available.
" HDMI/DVI Video Input jack
(High Definition Multimedia Interface)
Connect to the HDMI jack for device with HDMI or
DVI output.
' DVI Audio Input jacks
(Digital Visual Interface)
Connect to the digital audio output jacks for device
with DVI output.
and P
B R