O
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (antenna) and
cable channels. After the available channels are memorized, use the CH
to scan through the channels. This eliminates the need to change channels by entering the
channel digits.
Selecting the Video Signal Source
Before your TV can begin memorizing the available channels, you must specify the type of
signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button.
Press the ... or † button to
select "Channel", then press the
ENTER button.
2
Press the ... or † button to
select "Air/CATV", then press the
ENTER button.
Press the ... or † button to
select "Air", "STD", "HRC" or
"IRC", then press the ENTER
button.
Press the EXIT button to exit.
• "STD", "HRC" and "IRC" identify various types of cable TV systems. Contact your local cable company
to identify the type of cable system that exists in your particular area. At this point the signal source
has been selected. Proceed to "Storing Channels in Memory".
• Subscription cable services require service-specific requirement for viewing.
26
P E R AT I O N
T V
Move
T V
Move
Channel
√ √
Antenna
: Ant.1
√ √
Air/CATV
: Air
√ √
Auto Program
√ √
Favorite Channels
√ √
Fine Tune
√ √
Add/Delete
† More
Enter
Return
Channel
√ √
Antenna
: Ant.1
√ √
Air/CATV
: Air
Air
√ √
Auto Program
STD
√ √
Favorite Channels
HRC
√ √
Fine Tune
IRC
√ √
Add/Delete
† More
Enter
Return
and CH
buttons
œ If you are connected to an
antenna, press the ... or † button
to select "Air".
œ If you connected cable, press
the ... or † button to select the
type of cable system: "STD",
"HRC" or "IRC".