Advertisement
RADIAL HEADBONE™ OWNER'S MANUAL
Table Of Contents
Caution Statement & Legal Disclaimer ..............................Inside cover
Introduction ................................................................................1
Feature Set ................................................................................3
Quick Start .................................................................................4
Getting To Know Your Headbone ..............................................6
FAQ ...........................................................................................10
Warranty ............................................................................Back cover
Congratulations on your purchase of a Radial Headbone!
As part of the growing family of Tonebone products, the Headbone VT
provides the discerning guitarist with options to achieve creative new
sounds with a simple, yet extremely versatile interface.
The Headbone VT is designed to connect two tube amplifier heads to one
speaker cabinet and switch between amplifiers with either the on-board
or remote footswitch. The Headbone uses pure Class-A electronics under
digital control to switch the hi-impedance guitar signals and speaker-
level outputs from your amps. Add Slingshot™ remote control and you
get a true marvel whose time has come! Best of all, the Headbone is
engineered to ensure the safe operation of your amps under demanding
live performance conditions.
To take advantage of the wonderful features that have been incorporated
into the Headbone, please take the time to read through this manual
before you use it. This will give you a broader sense of the Headbone's
capabilities and ensure its safe and proper operation. If you have
questions that are not covered here, please visit the FAQ section on our
web site. This is where we post answers from questions that come from
users. If you have a question that is not covered there, please feel free
to send us an email at info@radialeng.com and we will do our very best
to respond as quickly as possible.
Radial Engineering Ltd.
True to the Music
Page
Headbone User Guide
Hide quick links:
Advertisement
Need help?
Do you have a question about the Tonebone Headbone VT and is the answer not in the manual?
Questions and answers
Why won't the headbone vt work with solid state amplifiers? And what about stereo out solid state amplifiers. Thank you, I'm not well versed in why this wouldn't work. Jon Smyth
The Radial Engineering Tonebone Headbone VT will not work with solid-state amplifiers because it is designed specifically for use with tube amplifiers. Using a solid-state amp with the Headbone VT could damage both the amplifier and the Headbone, and it voids the warranty. Additionally, the Headbone VT is not designed to handle stereo output from solid-state amplifiers, as it only supports switching between two mono tube amp heads connected to a single speaker cabinet.
This answer is automatically generated
@Mr. Anderson Thank you for responding and answering my question. Kind regards, Jon