Printek I80 Quick Start Manual

I80 Quick Start Guide
BEFORE you begin, please visit
Drivers and Software, to download the I80 printer driver.

Printer features

Control Panel Paper Door
Status LEDs USB Data Port

LOADING PAPER :

Roll Paper –
Open the paper door by inserting your finger into the cutout in the paper door and gently pulling the door toward the front of the printer.
•
• Insert the leading edge of the paper roll into the printer with the coated side down.
• Close the paper door and push the paper feed button to insure the paper is under the roller and able to advance.
Black Mark Paper –
• Open the paper door by inserting your finger into the cutout in the paper door and gently pulling the door toward the front of the printer.
Insert the leading edge of the paper roll into the printer with the black mark facing up.
•
Close the paper door and push the paper feed button to insure the paper is under the roller and able to advance. If the printer is properly
•
configured for Black Mark paper the paper should advance until the black mark is detected by the printer.

Single Sheet Paper -

• Insert the single sheet of paper with the coated side down into the top of the printer.
• The printer will grab the single sheet and place it into the printer ready to print.
• If the printer has received a print job, the printer will begin to print as soon as the paper is detected.
© 2021 Printek LLC 3515 Lakeshore Drive, St. Joseph, MI 49085 PH:800.368.4636
Quick Start Guide
This guide provides information on the daily use of the I80 printer.
For additional information, please refer to the I80 User Guide.
www.printek.com
Paper door release
Power Port
www.printek.com
Mobile Printers; Service and Support;
Media (8.5'')
Paper Door Open
Printer can accept roll paper, fanfold or single sheet paper.