Advertisement
Quick Links
Model #
2658AFGAC
McKenzie
Hutch
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start
by reading the Assembly Instructions before you
begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this unit.
Do not overload shelves on this unit.
Unload items from this unit prior to moving.
Before loading or moving this unit, check all screws
and supports for tightness.
Handle the glass plates with care.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
P.O. Box 2827
Eugene, OR 97402 USA
Glass is fragile.
Production Code:
VN
Service Policy:
which are defective, missing or damaged.
Please contact Whittier Wood Products
customer service department directly (by
phone, fax, mail or E-mail) for replacement
parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
800-653-3336
800-653-3336
Outside U.S. or Canada: 541- 687- 0213
Outside U.S. or Canada: 541- 687- 0213
Fax: 541-687-2060 •
Fax: 541-687-2060 • w w w
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A
Read the Assembly Instructions completely before
beginning your project.
Store the item: 1) in the box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
affect the stability of your furniture. Tighten or repair
as needed.
This Assembly requires two people.
We will replace parts
w w w.whittie
.whittier r wood.com
wood.com
08/08
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Whittier Wood 2658AFGAC
Summary of Contents for Whittier Wood 2658AFGAC
- Page 1 2658AFGAC McKenzie Hutch Service Policy: We will replace parts which are defective, missing or damaged. Please contact Whittier Wood Products customer service department directly (by Assembly Instructions phone, fax, mail or E-mail) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
- Page 2 2658AFGAC McKenzie Hutch — Parts List Please identify the parts and check that quantities received ma tch those on this list. If you need to replace a part, refer to the following letter an d model name. C — Small Back Mirror —...
- Page 3 Shelf until it is entirely inside the unit. Still holding the shelf vertically, lift it high enough so that it goes past the Plastic Shelf Brackets (O). Turn the shelf horizontally so that it rests upon the back wood divider and the Plastic Shelf Brackets (O). See Figure 2. 2658AFGAC — Page 3 — 08/08...
- Page 4 Figure 3. The height of the lower Plastic Shelf Brackets are adjustable. FIG. 4 4. Lift the McKenzie Hutch and place it flush against the back edge and centered side-to-side of the Buffet. 2658AFGAC — Page 4 — 08/08...
- Page 5 This will soon dissipate. NOTE: PLUG IN THE ELECTICAL CORD AND TEST YOUR HALOGEN LIGHTING. If you experience problems, call Whittier Wood Furniture Customer Service. 2658AFGAC — Page 5 — 08/08...
- Page 6 Note: When using the 2658AFGAC Hutch and the 2657AFGAC Buffet, secure the 2657AFGAC Buffet to the wall with tipping restraint sets included in the 2657AFGAC Buffet hardware. Follow instructions below. Fig. 7c Fig. 7a Wall Fig. 7b Fig. 7d Tipping Restraint Position unit at desired location.
Need help?
Do you have a question about the 2658AFGAC and is the answer not in the manual?
Questions and answers