Layout Menu - Samsung ML 3560 User Manual

Layout Menu

Use the Layout menu to define all settings relating to output.
(*: the default setting)
Item
Values: Portrait*, Landscape
Choose the default orientation of print image
on the page.
Orientation
Portrait
Values: Off*, Long Edge, Short Edge
To print on both sides of paper, choose the
binding edge as follows.
• Long Edge: Flip on long edge. Prints
pages to read like a book.
• Short Edge: Flip on short edge. Prints
pages to read by flipping over like a note
pad.
2
Duplex
Long Edge in the
Portrait orientation
2
3
5
Short Edge in the
Portrait orientation
Select Off to print on one side of paper.
N
: This menu item is available only
OTE
when you install an optional duplex unit.
Explanation
Landscape
2
3
5
3
5
Long Edge in the
Landscape orientation
3
2 5
Short Edge in the
Landscape orientation
Using the Control Panel
Item
Duplex Margin
Simplex
Margin
Copies
3.5
Explanation
Values: Top/Left:5.0*, Short/Long: 0*
In this menu, you can set the margin of print
materials for double-sided printing. You can
increase or decrease the value in 0.1 mm
increments.
• Top Margin: Set the top margin, from 0.0
to 9.9 mm.
• Left Margin: Set the left margin, from 0.0
to 9.9 mm.
• Short Binding: Set the bottom margin of
the rear side for short binding, from 0.0 to
22 mm.
• Long Binding: Set the right margin of the
rear side for long binding, from 0.0 to 22
mm.
This menu item is available only
N
:
OTE
when you install an optional
duplex unit
Values: 0.0*
Set the margin of print materials for one-
sided printing. You can increase or decrease
the value in 0.1 mm increments.
• Top Margin: Set the top margin, from 0.0
to 250 mm.
• Left Margin: Set the left margin, from 0.0
to 164 mm.
Values: 1* ~ 999
Set the default number of copies by selecting
any number from 1 to 999.
.