Layout Menu; Paper Menu - Samsung ML ML-4050N User Manual

Layout menu

Use the Layout menu to define all settings relating to output.
Item
Orientation Choose the default orientation of the print image
on the page.
Portrait
Simplex Set the margin of print materials for one-sided
Margin printing. You can increase or decrease the value in
0.1 mm increments.
• Top Margin: Set the top margin.
• Left Margin: Set the left margin.
Duplex To print on both sides of paper, choose the binding
edge as follows.
• Long Edge
•
Short Edge
2
Long Edge in the
Portrait orientation
2
3
5
Short Edge in the
Portrait orientation
Select Off to print on one side of the paper.
Note
• This menu item is available when the
optional duplex unit is installed.
Explanation
Landscape
: Flip on the long edge.
: Flip on the short edge.
2
3
5 3
5
Long Edge in the
Landscape orientation
3
2 5
Short Edge in the
Landscape orientation
Item
Duplex In this menu, you can set the margins for double-
Margin sided printing. You can increase or decrease the
value in 0.1 mm increments.
• Top Margin: Set the top margin.
• Left Margin: Set the left margin.
• Short Binding: Set the bottom margin of the
back of the page for short binding.
• Long Binding: Set the right margin of the back
of the page for long binding.

Paper menu

Use the Paper menu to define all settings relating to print materials such
as paper feed and exit, as well as size and type the specific print
materials you are using with your printer.
Item
Copies Set the default number of copies by selecting any
number from 1 to 999.
Paper Size Depending on the paper source or duplex setting,
available options vary.
Select the paper size currently loaded in the tray.
Paper Type Select the paper type currently loaded in the tray.
Paper Select which tray you want to use.
Source
• If you select
determine the source.
• Select MP Tray or Manual Feeder to use the
multi-purpose tray. If you select Manual Feeder,
you need to press OK each time you print a
page.
• Tray 2, Tray 3, or Tray 4 is available only when
the corresponding tray is installed.
Tray When you select any other value except Auto from
Chaining Paper Source and the selected tray is empty, you
can set the printer automatically to print from other
trays.
If this menu item is set to Off, the default LED lights
red and the printer doesn't work until you insert
paper into the specified tray.
2.3
<System setup>
Explanation
Note
• This menu item is available when the
optional duplex unit is installed.
Explanation
, the printer can automatically
Auto