2. Layout menu
Use the 2. Layout menu to define all settings relating to output.
Item
Orientation
Values: Portrait, Landscape
Choose the default orientation of the print image
on the page.
Portrait
Simplex
Values: Top Margin: 0, Left Margin: 0
Margin
Set the margin of print meterials for one-sided
printing. You can increase or decrease the value in
0.1 mm increments.
• Top Margin: Set the top margin, from 0 to 250
mm.
• Left Margin: Set the left margin, from 0 to 164
mm.
Explanation
Landscape
Item
Duplex
Values: Off, Long Edge, Short Edge
To print on both sides of paper, choose the binding
edge as follows.
•
Long Edge
•
Short Edge
Long Edge in the
Portrait orientation
Short Edge in the
Portrait orientation
Select Off to print on one side of the paper.
Duplex
Values: Top Margin/ Left Margin: 5.0,
Margin
Short Binding/ Long Binding: 0
In this menu, you can set the margins for double-
sided printing. You can increase or decrease the
value in 0.1 mm increments.
• Top Margin: Set the top margin, from 0.0 to 9.9
mm.
• Left Margin: Set the left margin, from 0.0 to 9.9
mm.
• Short Binding: Set the bottom margin of the
back of the page for short binding, from 0 to 22
mm.
• Long Binding: Set the right margin of the back
of the page for long binding, from 0 to 22 mm.
2.3
<System setup>
Explanation
: Flip on the long edge.
: Flip on the short edge.
2
3
2
5
3
5
Long Edge in the
Landscape orientation
2
2
3
5
Short Edge in the
Landscape orientation
Note
• In the ML-4550 and ML-4551N, this menu
item is available when the optional duplex
unit is installed.
Note
• In the ML-4550 and ML-4551N, this menu
item is available when the optional duplex
unit is installed.
3
5