Download Print this page

Whittier Wood 1263AFDAO Assembly Instructions Manual

Prairie city cal-king mantel storage bed; prairie city cal-king mantel bed

Advertisement

Quick Links

Prairie City Mantel Beds
AFLSO = Summer Oak finish
AFDAO = Autumn Oak finish
Assembly Instructions
Model #
1263AFLSO;
1263AFDAO
Prairie City Cal-King
Mantel Storage Bed
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
1282AFLSO;
1282AFDAO
Prairie City Cal-King
Mantel Bed
CALL US FIRST! Do not return this item to the store
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
For normal household use only. Not recommended to use this unit in a
commercial setting.
Remove items before you move this unit.
Do not overload the drawers.
Before you load or move this unit, tighten all screws and supports.
Before you begin your project, completely read the Assembly
Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
This assembly requires two people.
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
Production Code:
VN
WARNING
12/13

Advertisement

loading
Need help?

Need help?

Do you have a question about the 1263AFDAO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Whittier Wood 1263AFDAO

  • Page 1 For a replacement (upper portion of this page), the part letter, production part, directly contact Whittier Wood Products customer code, quantity needed, reason for replacement and your service department by phone, fax, mail or email.
  • Page 2 1263AFLSO; 1263AFDAO Prairie City Cal-King Mantel Storage Bed; 1282AFLSO; 1282AFDAO Prairie City Cal-King Mantel Bed Parts List Please note this Assembly Instruction is for Prairie City Cal-King Mantel Storage Bed (#1263) and Prairie City Cal-King Mantel Rail Bed (#1282). The Parts Lists for each component follow.
  • Page 3 1263AFLSO; 1263AFDAO Prairie City Cal-King Mantel Storage Bed; 1282AFLSO; 1282AFDAO Prairie City Cal-King Mantel Bed Parts List 1264AFLSOa; 1264AFDAOa Pedestal Kit (x2) Part Description Quantity Pedestal Small Drawer Box (assembled) Large Drawer Box (assembled) Drawer Face (attached) Cal-King Trestle (23-1/4")
  • Page 4 1263AFLSO; 1263AFDAO Prairie City Cal-King Mantel Storage Bed; 1282AFLSO; 1282AFDAO Prairie City Cal-King Mantel Bed Parts List Part Description Quantity 1/4" x 80mm Hex Bolt 1/4" x 2-1/2" Hex Bolt (inserted) 1/4" x 1-3/4" Hex Bolt Pull (attached) #8 x 20mm Pan Head Screw (inserted)
  • Page 5 1263AFLSO; 1263AFDAO Prairie City Cal-King Mantel Storage Bed; 1282AFLSO; 1282AFDAO Prairie City Cal-King Mantel Bed Parts List 1283AFLSO; 1283AFDAO Cal-King Rail Kit (x1) Part Description Quantity #8 x 1-1/4" Black Screw #8 x 1" Black Screw (inserted) 1/4" T-Nut (inserted) 1/4"...
  • Page 6 1263AFLSO; 1263AFDAO Prairie City Cal-King Mantel Storage Bed; 1282AFLSO; 1282AFDAO Prairie City Cal-King Mantel Bed Assembly Instructions This assembly requires two people. Tools Required: 4mm Hex Wrench (provided), Phillips screwdriver, Slotted screwdriver, 1/2" & 7/16" open end or box end wrench and Tape measure Notes: Steps 1 through 10 are for the Prairie City Cal-King Mantel Storage Bed (#1263).
  • Page 7 1263AFLSO; 1263AFDAO Prairie City Cal-King Mantel Storage Bed; 1282AFLSO; 1282AFDAO Prairie City Cal-King Mantel Bed Assembly Instructions This assembly requires two people. Repeat step two for the other side. See Figures 3 and 3a. Fig. 3 Fig. 3a Align the Brackets on both sides and slide the Pedestal/Footboard assembly down on to the Headboard (A).
  • Page 8 1263AFLSO; 1263AFDAO Prairie City Cal-King Mantel Storage Bed; 1282AFLSO; 1282AFDAO Prairie City Cal-King Mantel Bed Assembly Instructions This assembly requires two people. NOTE: There are blocks mounted on the back side of the Footboard to support the end of the pedestal eliminating the need for an Assembled Foot in this position where it would be easily visible.
  • Page 9 1263AFLSO; 1263AFDAO Prairie City Cal-King Mantel Storage Bed; 1282AFLSO; 1282AFDAO Prairie City Cal-King Mantel Bed Assembly Instructions This assembly requires two people. Repeat by attaching three additional Assembled Feet (L) to the other Pedestal with 1/4" x 1-3/4" Hex Bolts (ZE) and 1/4" Flat Washers (W). See Figures 6 and 6a. Using a 1/2" wrench or Slotted screwdriver adjust the Adjustable Glides (ZI) on the bottoms of the Assembled Feet (L) so that the top surfaces of both Pedestal decks are 16"...
  • Page 10 1263AFLSO; 1263AFDAO Prairie City Cal-King Mantel Storage Bed; 1282AFLSO; 1282AFDAO Prairie City Cal-King Mantel Bed Assembly Instructions This assembly requires two people. Facing the Footboard, attach the Pedestal Assembly to the Footboard with a 90º Bracket (ZL) and four #6 x 1/2" Philtruss Screws (Q). Repeat for the other side. See Figures 7 and 7a.
  • Page 11 1263AFLSO; 1263AFDAO Prairie City Cal-King Mantel Storage Bed; 1282AFLSO; 1282AFDAO Prairie City Cal-King Mantel Bed Assembly Instructions This assembly requires two people. Move the bed assembly to its final position; if necessary readjust the glides at the bottom of the Assembled Feet so that all are touching the floor and support weight.
  • Page 12 1263AFLSO; 1263AFDAO Prairie City Cal-King Mantel Storage Bed; 1282AFLSO; 1282AFDAO Prairie City Cal-King Mantel Bed Assembly Instructions This assembly requires two people. To make sure the bed is square, measure the distance between opposing corners. If one of the measurements is larger, tap on a footboard leg until the measurement is equal. See Figure 9.
  • Page 13 1263AFLSO; 1263AFDAO Prairie City Cal-King Mantel Storage Bed; 1282AFLSO; 1282AFDAO Prairie City Cal-King Mantel Bed Assembly Instructions This assembly requires two people. 11. Position the two Slat Support (ZS) over the blocks that are mounted onto back side of the Footboard (B) and attach with four #8 x 1-5/8"...
  • Page 14 1263AFLSO; 1263AFDAO Prairie City Cal-King Mantel Storage Bed; 1282AFLSO; 1282AFDAO Prairie City Cal-King Mantel Bed Assembly Instructions This assembly requires two people. 13. Repeat step twelve for the other side. See Figures 13 and 13a. Fig. 13a Fig. 13 14. Align the Brackets on both sides and slide the Side Rail/Footboard assembly down on to the Headboard (A).
  • Page 15 1263AFLSO; 1263AFDAO Prairie City Cal-King Mantel Storage Bed; 1282AFLSO; 1282AFDAO Prairie City Cal-King Mantel Bed Assembly Instructions This assembly requires two people. 15. Using the Hex Wrench (ZM), attach the Headboard to the Side Rails with two 1/4" x 80mm Hex Bolts (ZC).
  • Page 16 1263AFLSO; 1263AFDAO Prairie City Cal-King Mantel Storage Bed; 1282AFLSO; 1282AFDAO Prairie City Cal-King Mantel Bed Assembly Instructions This assembly requires two people. 17. Move the bed assembly to its final position. Position the Slats (ZR) on the bottom edges of the rails and place the slat without the Assembled Foot nearest to the Footboard.

This manual is also suitable for:

1282aflso1263aflso1282afdao