Roland Octapad SPD-20X Owner's Manual page 50

Selecting Types for External Pads (TRIG TYPE)
The SPD-20X's Trigger Inputs allow you to connect and play using a variety of pad types. While the
trigger signal output from a pad can have a variety of characteristics depending on the type of pad, you
can make sure the trigger signal is read correctly by setting the Trigger Type.
1
2
3
MEMO Trigger Type rim and head settings are shared for all pads (PD-8, CY-5/8).
NOTE
You cannot make settings for the internal pads. If you try to select the internal head by striking it, "–––" is
displayed.
4
Pad Trigger Types
Displayed
PD-8
CY-5
CY-8
KD-7
KD-9
In the Edit mode, select the SYSTEM parameter group.
Use [ ] or [ ] to select TRIG TYPE.
Strike the External pad you wish to edit.
TRIG-TYPE
TRIG-THRE
Use PATCH/VALUE [-] or [+] to set the value.
Description
For pad trigger PD-8
For cymbal trigger CY-5, rim choke function is enabled in this type
For cymbal trigger CY-8, rim choke function is enabled in this type
For kick trigger KD-7
For kick trigger KD-9
EX1H
PD-8
===
3
49