Software Update - Roberts iStream 3 Manual

Software update

From time to time, new software features for your radio may be developed. Your radio has therefore been designed
to allow its internal software to be updated using your Internet connection. You should not attempt to update your
radio unless it is recommended to you by Roberts Customer Services. Updating the software may remove all
network settings, radio station presets and alarm settings from your radio. It is important that you do not attempt
this procedure unless you have a good Internet connection and a reliable mains power supply. The radio connects
to your router using a WiFi connection, make sure that this is also reliable before proceeding.
1. The 'Software update' option is accessed via the System Settings menu. When you select 'Software update'
the menu will display 'Auto check setting' and 'Check now'. If you want your radio to check periodically for new
software versions choose 'Auto check settings' and then choose 'YES'. If you do not want your radio to check
for updates choose 'NO'.
2. To check if there are any software updates available currently, choose 'Check now'. The radio will check to see
if an update is available. The display will show 'Checking for new versions'. If there are no updates then the
display will show 'Software up to date'. If a software update is available your radio will then offer the choice
of updating the software or not, displaying 'New version available. Update software?'. Select the 'YES' option
if you wish to go through the update process. If you choose to update your radio it will first download the new
software and will then reprogram its internal memory. This may take anything from a few seconds to a few
minutes depending on the speed of your internet connection.
3. Once the software update is completed, the radio will prompt you to press Select to restart. Press Tuning and
your radio will then restart. You may find that you will need to reconfigure your network connection following
an update. You may also need to re-enter all radio station presets, alarm settings, and configuration options.
VERY IMPORTANT: Do not switch off the power to the radio until the update operation is complete and the
radio has restarted, otherwise the unit may become permanently damaged.
Network profiles
Each time that you connect your radio to a WiFi network, the radio will store the details of that connection (SSID, security key, DHCP/IP address
settings) as a profile. Up to four such profiles are stored in the radio so that if the unit is used in multiple locations there is no need to enter the network
settings when returning to a location previously visited. The radio stores the four most recent profiles in memory identified by their SSID. Normally
the radio will attempt to connect to one of the stored profiles and only if it is unable to do so will you need to use the
In the event that you visit a location only once you may wish to delete the profile for the network in that location to avoid losing other profiles.
1. Press Menu. Choose 'System settings', 'Network' and then 'Network profile'. Press Tuning to see the stored profiles. The profile which is currently
in use (if any) is marked with an asterisk.
2. To remove a profile from memory, rotate Tuning to highlight the profile to be deleted and then press the control. The radio will offer a 'YES' or 'NO'
selection. Choose 'YES'. The selected profile will be deleted. Note that it is not possible to delete a profile which is currently in use.
65
30
DAB
System settings
Time/Date
Backlight
Inactive Standby
Language
Factory reset
Software update
Software update
Auto-check setting
Check now
Software update
Check periodically for
new versions?
Network Wizard (see page 17).