Information; Factory Reset; Electro-Magnetic Compatibility Advice; Product Markings - Roberts iStream 3 Manual

Information

Factory reset

If you wish to completely reset your radio to its initial state this may be performed
by following this procedure. By performing a factory reset, all user entered settings
will be erased.
1. With your radio switched on, Press Menu.
2. Choose 'Main menu', 'System settings', 'Factory reset' and then 'YES' to
proceed.
If you do not wish to carry out a system reset, highlight 'NO' and then press
the control. The display will revert to the previous menu.
3. With 'YES' highlighted, press Tuning. A full reset will be performed and the
radio will restart as if first plugged in. The DAB stations list together with any
preset stations will be erased and your wireless network connection details
will be lost. All configuration settings will be restored to their defaults, the
clock and alarms will be reset.
Electro-magnetic compatibility advice
In the event of a malfunction due to electrostatic discharge, mains power supply
transients or short interruptions, reset the product as above to resume normal
operation. If you are not able to perform the reset operation as above, removal
and reconnection of the power supply and batteries may be required.
If the product is used in an environment with any ESD Immunity / Radiated
Immunity / Conducted Immunity disturbance, the product may malfunction. It will
automatically recover to normal when the ESD Immunity / Radiated Immunity /
Conducted Immunity disturbance is stopped.
Product markings
30
DAB
System settings
Network
Time/Date
Backlight
Inactive Standby
Language
Factory reset
Factory reset
DC Voltage
Power input 12V / 1.5A
USB output 5V / 1A
Recycling
This product bears the selective sorting symbol for
Waste Electrical and Electronic Equipment (WEEE).
This means that this product must be handled
pursuant to European directive 2012/19/EU in order
to be recycled or dismantled to minimize its impact on
the environment.
The user has the choice to give the product to a
competent recycling organization or to the retailer
when buying a new electrical or electronic equipment.
Information
Proceed?
64