Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for IBASE Technology ASTUT-152-RE1S
Summary of Contents for IBASE Technology ASTUT-152-RE1S
- Page 1 ASTUT-152-RE1S Industrial Panel PC User’s Manual Version 1.0 (Sep. 2017)
- Page 2 No part of this publication may be reproduced, copied, stored in a retrieval system, translated into any language or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of IBASE Technology, Inc. (hereinafter referred to as “IBASE”).
-
Page 3: Compliance
EU directive of for waste electrical and electronic equipment (WEEE - 2012/19/EU). Instead, it should be disposed of by returning it to a municipal recycling collection point. Check local regulations for disposal of electronic products. ASTUT-152-RE1S User Manual... -
Page 4: Important Safety Information
Use neutral cleaning agents or diluted alcohol to clean the device chassis with a cloth. Then wipe the chassis with a dry cloth. • Vacuum the dust with a computer vacuum cleaner to prevent the air vent or slots from being clogged. ASTUT-152-RE1S User Manual... -
Page 5: Warning
IBASE, such as CPU, CPU cooler, memory, storage devices, power adapter, panel and touchscreen. ＊ PRODUCTS, HOWEVER, THAT FAIL DUE TO MISUSE, ACCIDENT, IMPROPER INSTALLATION OR UNAUTHORIZED REPAIR SHALL BE TREATED AS OUT OF WARRANTY AND CUSTOMERS SHALL BE BILLED FOR REPAIR AND SHIPPING CHARGES. ASTUT-152-RE1S User Manual... -
Page 6: Technical Support & Services
Software in use (such as OS and application software, including the version numbers) 3. If repair service is required, you can download the RMA form at http://www.ibase.com.tw/english/Supports/RMAService/. Fill out the form and contact your distributor or sales representative. ASTUT-152-RE1S User Manual... -
Page 7: Table Of Contents
LVDS / eDP Connector Selection (J12) ........ 21 2.4.7 PCIe1 Configuration (J7) ............22 Connectors Quick Reference ..............23 2.5.1 COM Ports (CN1) ..............24 2.5.2 DVI-I & DVI-D Ports (CN2) ........... 25 2.5.3 eDP Connector (CN3) ............26 ASTUT-152-RE1S User Manual... - Page 8 PCI Subsystem Settings ............55 4.4.2 ACPI Settings ................. 58 4.4.3 Wake up Event Settings ............59 4.4.4 Trusted Computing ..............59 4.4.5 CPU Configuration ..............60 4.4.6 SATA Configuration ..............61 4.4.7 Shutdown Temperature Configuration ........62 viii ASTUT-152-RE1S User Manual...
- Page 9 Boot Settings..................73 4.6.1 CSM Parameters ..............74 Security Settings ................... 75 Save & Exit Settings................76 Appendix ...................... 77 I/O Port Address Map ................78 Interrupt Request Lines (IRQ) ............... 79 Watchdog Timer Configuration .............. 80 ASTUT-152-RE1S User Manual...
-
Page 10: Chapter 1 General Information
Chapter 1 General Information The information provided in this chapter includes: • Features • Packing List • Specifications • Overview • Dimensions... -
Page 11: Introduction
1.1 Introduction ASTUT-152-RE1S is a 15" all-in-one Panel PC with Riser Card Expansion carrying the level of IP65 waterproof ingress protection. ® 12.1” industrial projected touch panel PC that is railway compliant. With Intel Atom™ E3845 Quad-Core based processor, the device carries the level of IP65 ingress protection for the panel to provide good quality of water-tight. -
Page 12: Packing List
General Information 1.3 Packing List Your ASTUT-152-RE1S package should include the items listed below. If any of the items below is missing, contact the distributor or the dealer from whom you purchased the product. • ASTUT-152-RE1S • Mounting Clamp x 10 •... -
Page 13: Specifications
7.9 kg (17.4 lb) Ingress IP65 for front panel with panel mount Protection Certificate CE, FCC Class B sPanel 15” TFT-LCD Display Type Touch Type Resistive touch Point of Touch Resolution Max. 1024 x 768 Color Max. 16.2 M ASTUT-152-RE1S User Manual... - Page 14 Environment • Operating: 0 ~ 50 °C (32 ~ 122 °F) Temperature • Storage: --20 ~ 60 °C (-4 ~ 140 °F) Relative 10 ~ 90% (non-condensing) Humidity All specifications are subject to change without prior notice. ASTUT-152-RE1S User Manual...
-
Page 15: Overview
1.6 Overview Oblique View ASTUT-152-RE1S User Manual... - Page 16 Power Switch USB 2.0 Port DC Power Connector GbE LAN Port Audio Jacks COM1 RS-232/422/485 Port (From top to bottom: Line-Out, Line-In, Mic-In) 2.5” Drive bay COM2 RS-232 Port DVI-I Port USB 3.0 Port DVI-D Port Display Port ASTUT-152-RE1S User Manual...
-
Page 17: Dimensions
1.7 Dimensions Unit: mm ASTUT-152-RE1S User Manual... -
Page 18: Hardware Installation & Motherboard Information
Chapter 2 Hardware Installation & Motherboard Information The information provided in this chapter includes: • Memory installation and membrane keypad extension • Information and locations of connectors... -
Page 19: Hardware Installation
There are two SO-DIMM DDR3L memory slots inside ASTUT-152-RE1S and the maximum memory supported is 8 GB. The ASTUT-152-RE1S supports two SO- DIMM DDR3L memory slots for a maximum total memory of 8GB. To install the modules, locate the memory slot on the board and perform the following steps: 1. -
Page 20: Pinout For Com1, Com2, & Power Input
DCD, Data carrier detect DSR, Data set ready RXD, Receive data RTS, Request to send TXD, Transmit data CTS, Clear to send DTR, Data terminal ready RI, Ring indicator Ground Assignment RS-232 RS-422 RS-485 DATA- DATA+ Ground Ground Ground ASTUT-152-RE1S User Manual... - Page 21 • COM2 RS-232 Port Assignment Assignment DCD, Data carrier detect DSR, Data set ready RXD, Receive data RTS, Request to send TXD, Transmit data CTS, Clear to send DTR, Data terminal ready RI, Ring indicator Ground ASTUT-152-RE1S User Manual...
-
Page 22: Setting The Jumpers
Motherboard Information 2.2 Setting the Jumpers Set up and configure your ASTUT-152-RE1S by using jumpers for various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your use. -
Page 23: Jumper & Connector Locations On Motherboard
2.3 Jumper & Connector Locations on Motherboard Motherboard: MI980VF CN11 CN14 SYS_FAN1 CN10 CN13 Intel ® ® Intel Gen. QM87 Core i7/i5/ ® i3/Celeron QC/DC CPU_FAN1 PCIE1 CN4 & CN5 CN12 MI980VF - top ASTUT-152-RE1S User Manual... -
Page 24: Jumpers Quick Reference
Motherboard Information 2.4 Jumpers Quick Reference Function Connector Name Page COM2 RS-232 Power Selection COM1 RS-232/422/485 Power Selection LCD Panel Power Selection CMOS Data Clearance ME Register Clearance LVDS / eDP Connector Selection PCIe1 Configuration Factory User Only ASTUT-152-RE1S User Manual... -
Page 25: Com2 Rs-232 Power Selection (Jp1)
2.4.1 COM2 RS-232 Power Selection (JP1) Function Pin closed Illustration (default) ASTUT-152-RE1S User Manual... -
Page 26: Com1 Rs-232/422/485 Power Selection (Jp2)
Motherboard Information 2.4.2 COM1 RS-232/422/485 Power Selection (JP2) Function Pin closed Illustration (default) ASTUT-152-RE1S User Manual... -
Page 27: Lcd Panel Power Selection (J13)
2.4.3 LCD Panel Power Selection (J13) Function Pin closed Illustration 3.3V (default) ASTUT-152-RE1S User Manual... -
Page 28: Cmos Data Clearance (J17)
Motherboard Information 2.4.4 CMOS Data Clearance (J17) Function Pin closed Illustration Normal (default) Clear CMOS ASTUT-152-RE1S User Manual... -
Page 29: Me Register Clearance (J18)
2.4.5 ME Register Clearance (J18) Function Pin closed Illustration Normal (default) Clear ME Register ASTUT-152-RE1S User Manual... -
Page 30: Lvds / Edp Connector Selection (J12)
Motherboard Information 2.4.6 LVDS / eDP Connector Selection (J12) Function Pin closed Illustration Connector LVDS (default) ASTUT-152-RE1S User Manual... -
Page 31: Pcie1 Configuration (J7)
2.4.7 PCIe1 Configuration (J7) Function Pin closed Illustration PCIe (x16) Open (default) 2 x PCIe (x8) Close ASTUT-152-RE1S User Manual... -
Page 32: Connectors Quick Reference
DDR3 SO-DIMM Socket J10, J11 Audio Connector for Front Panel Front Panel Settings CPU Fan Power Connector CPU_FAN1 System Fan Power Connector SYS_FAN1 Mini PCIe / mSATA Connector (shared with CN7) Mini PCIe Connector Factory Use Only JP7, JP9 ASTUT-152-RE1S User Manual... -
Page 33: Com Ports (Cn1)
DCD, Data carrier detect DSR, Data set ready RXD, Receive data RTS, Request to send TXD, Transmit data CTS, Clear to send DTR, Data terminal ready RI, Ring indicator Ground Assignment RS-232 RS-422 RS-485 DATA- DATA+ Ground Ground Ground ASTUT-152-RE1S User Manual... -
Page 34: Dvi-I & Dvi-D Ports (Cn2)
Assignment DCD, Data carrier detect DSR, Data set ready RXD, Receive data RTS, Request to send TXD, Transmit data CTS, Clear to send DTR, Data terminal ready RI, Ring indicator Ground 2.5.2 DVI-I & DVI-D Ports (CN2) ASTUT-152-RE1S User Manual... -
Page 35: Edp Connector (Cn3)
2.5.3 eDP Connector (CN3) Assigment Assigment 3.3V TXN0 3.3V TXP0 3.3V 3.3V AUXP 3.3V AUXN VCC3 VCC12 VCC5 Brightness BKLT_EN VCC12 VCC3 SMB_THRM_CLK TXN1 SMB_THRM_DATA TXP1 ASTUT-152-RE1S User Manual... -
Page 36: Display Port & Usb 2.0 Ports (Cn4 & Cn5)
Motherboard Information 2.5.4 Display Port & USB 2.0 Ports (CN4 & CN5) 2.5.5 LAN & USB 3.0 Ports (CN6, CN9) 2.5.6 SATA III Connector (CN7, CN8, CN13, CN14) ASTUT-152-RE1S User Manual... -
Page 37: Sata Ii Connector (Cn10, Cn11)
2.5.7 SATA II Connector (CN10, CN11) 2.5.8 HD Audio Connector (CN12) ASTUT-152-RE1S User Manual... -
Page 38: Lvds Connector (Jp3, Jp4)
Motherboard Information 2.5.9 LVDS Connector (JP3, JP4) JP3: 2 channel JP4: 1 channel Assigment Assigment TX0P TX0N Ground Ground TX1P TX1N Ground Ground TX2P TX2N Ground Ground CLKP CLKN Ground Ground TX3P TX3N Power Power ASTUT-152-RE1S User Manual... -
Page 39: Lcd Backlight Connector (Jp5)
2.5.10 LCD Backlight Connector (JP5) Assigment Assigment +12V Brightness Control Backlight Enable Ground 2.5.11 USB 2.0 Connector (JP6, JP8) Assigment Assigment Ground Ground ASTUT-152-RE1S User Manual... -
Page 40: Com Connector (J1, J2, J3, J4)
Motherboard Information 2.5.12 COM Connector (J1, J2, J3, J4) Assigment Assigment DCD# SIN# SOUT DTR# DSR# RTS# CTS# ASTUT-152-RE1S User Manual... -
Page 41: Atx Power Connector (J5)
2.5.13 ATX Power Connector (J5) Assigment Assigment 3.3V 3.3V 3.3V -12V Ground Ground PS-ON Ground Ground Ground Ground Ground Power good 5VSB +12V ASTUT-152-RE1S User Manual... -
Page 42: Atx 12V Power Connector (J6)
Motherboard Information 2.5.14 ATX 12V Power Connector (J6) Assigment Assigment Ground Ground +12V +12V 2.5.15 Digital I/O Connector (J8) Assigment Assigment Ground Out3 Out1 Out2 Out0 ASTUT-152-RE1S User Manual... -
Page 43: Ddr3 So-Dimm Socket (J10, J11)
2.5.16 DDR3 SO-DIMM Socket (J10, J11) 2.5.17 Audio Connector for Front Panel (J21) Assigment Assigment MIC IN_L Ground MIC IN_R LINE_R Ground Sense LINE_L Ground ASTUT-152-RE1S User Manual... -
Page 44: Front Panel Settings (J22)
Motherboard Information 2.5.18 Front Panel Settings (J22) Assigment Assigment Power BTN Power BTN HDD LED+ HDD LED- Reset BTN Reset BTN Power LED+ Power LED- 2.5.19 CPU Fan Power Connector (CPU_FAN1) Assigment Assigment Ground Rotation detection +12V Control ASTUT-152-RE1S User Manual... -
Page 45: System Fan Power Connector (Sys_Fan1)
2.5.20 System Fan Power Connector (SYS_FAN1) Assigment Assigment Ground Rotation detection +12V Control 2.5.21 Mini PCIe / mSATA Connector (J14) ASTUT-152-RE1S User Manual... -
Page 46: Mini Pcie Connector (J15)
Motherboard Information 2.5.22 Mini PCIe Connector (J15) ASTUT-152-RE1S User Manual... -
Page 47: Chapter 3 Driver Installation
Chapter 3 Driver Installation The information provided in this chapter includes: • ® Intel Chipset Software Installation Utility • VGA Driver Installation • HD Audio Driver Installation • LAN Driver Installation • ® Intel Management Engine (ME) Interface • ® Intel USB 3.0 Driver Installation... -
Page 48: Introduction
INF files for Plug & Play function for the chipset components. Follow the instructions below to complete the installation. 1. Insert the disk enclosed in the package. Click Intel and then Intel(R) 8 Series Chipset Drivers. 2. Click Intel(R) Chipset Software Installation Utility. ASTUT-152-RE1S User Manual... - Page 49 4. Click Yes to accept the software license agreement. 5. On the Readme File Information screen, click Next for installation. 6. After the driver is completely installed, click Finish and restart the computer for changes to take effect. ASTUT-152-RE1S User Manual...
-
Page 50: Vga Driver Installation
Driver Installation 3.3 VGA Driver Installation 1. Click Intel and then Intel(R) 8 Series Chipset Drivers. 2. Click Intel(R) Core(TM) i3/i5/i7 Graphics Driver. 3. When the Welcome screen appears, click Next to continue. ASTUT-152-RE1S User Manual... - Page 51 4. Click Yes to agree with the license agreement and continue the installation. 5. Click Install. 6. After the driver is completely installed, click Finish and restart the computer for changes to take effect. ASTUT-152-RE1S User Manual...
-
Page 52: Hd Audio Driver Installation
2. Click Realtek High Definition Audio Driver. 3. On the Welcome screen of the InstallShield Wizard, click Yes for installation. 4. After the driver is completely installed, click Finish and restart the computer for changes to take effect. ASTUT-152-RE1S User Manual... -
Page 53: Lan Driver Installation
3.5 LAN Driver Installation 1. Click Intel and then Intel(R) 8 Series Chipset Drivers. 2. Click Intel(R) PRO LAN Network Drivers. 3. Click Install Drivers and Software. ASTUT-152-RE1S User Manual... - Page 54 Driver Installation 4. When the Welcome screen appears, click Next to continue. 5. Agree with the license agreement and click Next. 6. Tick the checkbox for Drivers on the Setup Options screen and click Next to continue. ASTUT-152-RE1S User Manual...
- Page 55 7. Click Install. 8. After the driver is completely installed, click Finish and restart the computer for changes to take effect. ASTUT-152-RE1S User Manual...
-
Page 56: Intel Management Engine (Me) Interface
Microsoft .NET Framework 3.5 or later. 1. Click Intel, and then Intel(R) 8 Series Chipset Drivers. 2. Click Intel(R) ME 9.0 Drivers. 3. When the Welcome screen appears, tick the checkbox for Install Intel® Control Center and click Next.. ASTUT-152-RE1S User Manual... - Page 57 4. Click Yes to agree with the license agreement. 5. When the Setup Progress screen appears, click Next to continue the installation. 6. After the driver is completely installed, click Finish and restart the computer for changes to take effect. ASTUT-152-RE1S User Manual...
-
Page 58: Intel Usb 3.0 Drivers
1. Insert the disk enclosed in the package. Click Intel and then Intel(R) 8 Series Chipset Drivers. 2. Click Intel(R) USB 3.0 Drivers. ® 3. When the Welcome screen to the Intel USB 3.0 eXtensible Host Controller Driver appears, click Next to continue. ASTUT-152-RE1S User Manual... - Page 59 4. Click Yes to accept the software license agreement. 5. On the Readme File Information screen, click Next for installation. 6. After the driver is completely installed, click Finish and restart the computer for changes to take effect. ASTUT-152-RE1S User Manual...
-
Page 60: Chapter 4 Bios Setup
Chapter 4 BIOS Setup This chapter the different settings available in the AMI describes BIOS that comes with the board. The topics covered in this chapter are as follows: • Main Settings • Advanced Settings • Chipset Settings • Boot Settings •... -
Page 61: Introduction
These defaults have been carefully chosen by both AMI and your system manufacturer to provide the absolute maximum performance and reliability. Changing the defaults could make the system unstable and crash in some cases. ASTUT-152-RE1S User Manual... -
Page 62: Main Settings
BIOS Setup 4.3 Main Settings System Date Set the Date. Use Tab to switch between Data elements. System Time Set the Time. Use Tab to switch between Data elements. ASTUT-152-RE1S User Manual... -
Page 63: Advanced Settings
4.4 Advanced Settings This section allows you to configure, improve your system and allows you to set up some system features according to your preference. ASTUT-152-RE1S User Manual... -
Page 64: Pci Subsystem Settings
PERR# Generation Enables or disables PCI device to generate PERR#. SERR# Generation Enables or disables PCI device to generate SERR#. PCI Express Settings Change PCI Express devices settings. Value to be programmed into PCI Latency Timer Register. ASTUT-152-RE1S User Manual... - Page 65 BIOS to select the value. ASPM Support Set the ASPM Level: Force L0s – Force all links to L0s State: AUTO – BIOS auto configure: DISABLE – Disables ASPM. Extended Synch If ENABLED allows generation of Extended Synchronization patterns. ASTUT-152-RE1S User Manual...
- Page 66 On non-PCI Express aware OS’s (Pre Windows Vista) some devices may not be correctly reinitialized after S3. Enabling this restore PCI Express device configuration on S3 resume Warning: Enabling this may cause issues with other hardware after S3 resume. ASTUT-152-RE1S User Manual...
-
Page 67: Acpi Settings
OS. ACPI Sleep State Select ACPI sleep state the system will enter, when the SUSPEND button is pressed. Lock Legacy Resources Enabled or Disabled Lock of Legacy Resources. S3 Video Repost Enable or disable S3 Video Repost. ASTUT-152-RE1S User Manual... -
Page 68: Wake Up Event Settings
O.S. will not show TPM. Reset of platform is required. Security Device Support Enables or disables BIOS support for security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available. ASTUT-152-RE1S User Manual... -
Page 69: Cpu Configuration
Number of cores to enable in each processor package. Overclocking lock Flex_RATIO(194)MSR Limit CPUID Maximum Disabled for Windows XP. Execute Disable Bit XD can prevent certain classes of malicious buffer overflow attacks when combined with a supporting OS ASTUT-152-RE1S User Manual... -
Page 70: Sata Configuration
Select the performance state that the BIOS will set before OS handoff. EIST Enabled/Disabled Intel Speedstep. 4.4.6 SATA Configuration SATA Controller(s) Enable / Disable Serial ATA Controller. SATA Mode Selection (1) IDE Mode (2) AHCI Mode (3) RAID Mode. (This configuration is supported only with MI980VF) ASTUT-152-RE1S User Manual... -
Page 71: Shutdown Temperature Configuration
4.4.7 Shutdown Temperature Configuration ACPI Shutdown Temperature The default setting is Disabled. 4.4.8 iSmart Controller iSmart Controller Setup the power on time for the system. Schedule Slot 1 / 2 Setup the hour/minute for system power on. ASTUT-152-RE1S User Manual... -
Page 72: Amt Controller
Perform AMT/ME unconfigure without password operation. Amt Wait Timer Set timer to wait before sending ASF_GET_BOOT_OPTIONS. Activate Remote Assistance Process Trigger CIRA boot. PET Progress User can Enable/Disable PET Events progress to receive PET events or not. Watchdog Timer Enable/Disable Watchdog Timer. ASTUT-152-RE1S User Manual... -
Page 73: Usb Configuration
Maximum time the device will take before it properly reports itself to the Host Controller. ‘Auto’ uses default value: for a Root port it is 100ms, for a Hub port the delay is taken from Hub descriptor. ASTUT-152-RE1S User Manual... -
Page 74: F8186 Super Io Configuration
Set Parameters of Serial Ports. User can Enable/Disable the serial port and Select an optimal settings for the Super IO Device. 4.4.11.1. Serial Port Configuration F81866 SERIAL PORT1 MODE SELECT F81866 SERIAL PORT1 LOOP Back/RS232/RS422/RS485 mode select. ASTUT-152-RE1S User Manual... -
Page 75: F81866 Hardware Monitor
PC health status. Fan1/Fan2 Smart Fan Control This field enables or disables the smart fan feature. At a certain temperature, the fan starts turning. Once the temperature drops to a certain level, it stops turning again. ASTUT-152-RE1S User Manual... -
Page 76: Chipset Settings
Wake on LAN Enable or disable integrated LAN to wake the system. (The Wake On LAN cannot be disabled if ME is on at Sx state.) SLP_LAN# Low on DC Power Enable or Disable SLP_LAN# Low on DC Power. ASTUT-152-RE1S User Manual... - Page 77 Enable or disable PCI Express Clock Gating for each root port. DMI Link ASPM Control The control of Active State Power Management on both NB side and SB side of the DMI link. PCIe-USB Glitch W/A PCIe-USB Glitch W/A for bad USB device(s) connected behind PCIE/PEG port. ASTUT-152-RE1S User Manual...
- Page 78 4.5.1.3. PCH Azalia Configuration Azalia Control Detection of the Azalia device. Disabled = Azalia will be unconditionally be disabled. Enabled = Azalia will be unconditionally be enabled. Auto = Azalia will be enabled if present, disabled otherwise. ASTUT-152-RE1S User Manual...
-
Page 79: System Agent (Sa) Configuration
4.5.2 System Agent (SA) Configuration VT-d Check to enable VT-d function on MCH. Enable NB CRID Enable or disable NB CRID WorkAround. ASTUT-152-RE1S User Manual... - Page 80 Keep IGD enabled based on the setup options. DVMT Pre-Allocated Select DVMT 5.0 Pre-Allocated (Fixed) graphics memory size used by the internal graphics device. DVMT Total Gfx Mem Select DVMT 5.0 total graphics memory size used by the internal graphics device. ASTUT-152-RE1S User Manual...
- Page 81 Secondary booty display selection will appear based on your selection. VGA modes will be supported only on primary display. LVDS/EDP Control LVDS/EDP Control Gfx Low Power Mode This option is applicable for SFF only. Memory Configuration ASTUT-152-RE1S User Manual...
-
Page 82: Boot Settings
Enables/Disables Quiet Boot option. Fast Boot Enables/Disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot options. Boot Option Priorities Sets the system boot order. ASTUT-152-RE1S User Manual... -
Page 83: Csm Parameters
Controls the execution of UEFI and Legacy Storage OpROM. Launch Video OpROM Policy Controls the execution of UEFI and Legacy Video OpROM. Other PCI Device ROM Priority For PCI devices other than Network, Mass storage or Video defines which OpROM to launch. ASTUT-152-RE1S User Manual... -
Page 84: Security Settings
BIOS Setup 4.7 Security Settings Administrator Password Set Setup Administrator Password. User Password Set User Password. ASTUT-152-RE1S User Manual... -
Page 85: Save & Exit Settings
Discard Changes done so far to any of the setup options. Restore Defaults Restore/Load Defaults values for all the setup options. Save as User Defaults Save the changes done so far as User Defaults. Restore User Defaults Restore the User Defaults to all the setup options. ASTUT-152-RE1S User Manual... -
Page 86: Appendix
Appendix This section provides the mapping addresses of peripheral devices and the sample code of watchdog timer configuration. • I/O Port Address Map • Interrupt Request Lines (IRQ) • Digital I/O Sample Code • Watchdog Timer Configuration... -
Page 87: I/O Port Address Map
0F0h Clear Math Coprocessor Busy Signal 0F1h Reset Math Coprocessor 1F0h - 1F7h IDE Interface 2F8h - 2FFh Serial Port #2(COM2) 2B0h- 2DFh Graphics adapter Controller 360h - 36Fh Network Ports 3F8h - 3FFh Serial Port #1(COM1) ASTUT-152-RE1S User Manual... -
Page 88: Interrupt Request Lines (Irq)
The following table shows the IRQ used by the devices on board. Level Function IRQ0 System Timer Output IRQ1 Keyboard IRQ3 Serial Port #2 IRQ4 Serial Port #1 IRQ8 Real Time Clock IRQ14 Primary IDE IRQ15 Secondary IDE ASTUT-152-RE1S User Manual... -
Page 89: Watchdog Timer Configuration
Fintek 81866, program abort.\n"); return(1); }//if (SIO == 0) if (argc != 2) printf(" Parameter incorrect!!\n"); return (1); bTime = strtol (argv[1], endptr, 10); printf("System will reset after %d seconds\n", bTime); if (bTime) EnableWDT(bTime); } else ASTUT-152-RE1S User Manual... - Page 90 Set_F81866_Reg(0xF5, bBuf); //start counting //--------------------------------------------------------------------------- void DisableWDT(void) unsigned char bBuf; Set_F81866_LD(0x07); //switch to logic device 7 bBuf = Get_F81866_Reg(0xFA); bBuf &= ~0x01; Set_F81866_Reg(0xFA, bBuf); //disable WDTO output bBuf = Get_F81866_Reg(0xF5); bBuf &= ~0x20; bBuf |= 0x40; Set_F81866_Reg(0xF5, bBuf); //disable WDT ASTUT-152-RE1S User Manual...
- Page 91 Init_Finish; } F81866_BASE = 0x00; result = F81866_BASE; Init_Finish: return (result); //--------------------------------------------------------------------------- void Unlock_F81866 (void) outportb(F81866_INDEX_PORT, F81866_UNLOCK); outportb(F81866_INDEX_PORT, F81866_UNLOCK); //--------------------------------------------------------------------------- void Lock_F81866 (void) outportb(F81866_INDEX_PORT, F81866_LOCK); //--------------------------------------------------------------------------- void Set_F81866_LD( unsigned char LD) Unlock_F81866(); outportb(F81866_INDEX_PORT, F81866_REG_LD); outportb(F81866_DATA_PORT, LD); Lock_F81866(); ASTUT-152-RE1S User Manual...
- Page 92 #define F81866_DATA_PORT (F81866_BASE+1) //--------------------------------------------------------------------------- #define F81866_REG_LD 0x07 //--------------------------------------------------------------------------- #define F81866_UNLOCK 0x87 #define F81866_LOCK 0xAA //--------------------------------------------------------------------------- unsigned int Init_F81866(void); void Set_F81866_LD( unsigned char); void Set_F81866_Reg( unsigned char, unsigned char); unsigned char Get_F81866_Reg( unsigned char); //--------------------------------------------------------------------------- #endif // F81866_H ASTUT-152-RE1S User Manual...