Model Description; All Models; Gr2S Models; Gr2Bw Models - Hatco GR2S-24 Operating Manual

MODEL DESCRIPTION

All Models

Glo-Ray Designer Heated Shelves and Buffet Warmers are
ideal for holding hot food on a buffet line or at temporary serving
areas. all Designer models are constructed of sturdy aluminum
extrusions and feature a thermostatically-controlled heated
base, Designer color inset panels, and a cord and plug set.
NOTE: Refer to the OPTIONS aND aCCESSORIES section for
additional information.

GR2S Models

Glo-Ray Designer Heated Shelves are available in sizes from
30-1/4" to 78-1/4" (768 to 1988 mm) in length. all GR2S models
are shipped from the factory fully assembled and ready for use.
Heated Base
Figure 1. GR2S model

Plug Configurations

Units are supplied from the factory with an electrical cord and
plug installed. Plugs are supplied according to the application.
WARNING
ELECTRIC SHOCK HAzARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage, size,
and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install the proper voltage and size electrical receptacle.
NOTE: The specification label is located on the control panel
on the back of the unit. See label for serial number and
verification of unit electrical information.
NOTE: Receptacle not supplied by Hatco.
G R 2 B W - XX
Glo-Ray
Designer
Figure 3. model Designation

GR2BW Models

Glo-Ray Designer Buffet Warmers are available in lengths from
30-1/4" to 78-1/4" (768 to 1988 mm) and include prefocused
infrared overhead heat, incandescent display lights, and easy-
to-install sneeze guards.
Sneeze Guard
Figure 2. GR2BW model
Heated Surface Width
BW = Buffet Warmer
S = Heated Shelf
NEMA 5-15P
CEE 7/7 Schuko
Figure 4. Plug Configurations
4
Heated Base
NEMA 14-20P
NEMA 5-20P
BS-1363
Form No. GR2S2BWm-0511