Book cover keyboard for galaxy tab s7, galaxy tab s7 5g, galaxy tab s7+, galaxy tab s7+ 5g (363 pages)
Summary of Contents for Samsung SSC-5000
SSC-5000 System Keyboard user manual imagine the possibilities Thanks you for purchasing this Samsung product. To receive a more complete service, please register your product at www.samsung.com/global/register...
If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modiﬁcations or attempted repair.) When cleaning, do not spray water directly onto parts of the product. Doing so may cause ﬁre or electric shock.
FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation. ...
Cautions for Installation Adjusting System Keyboard Angle Fixing Power Cord Connecting RS-485 Device EQUIPMENT Connecting to PC using USB port Connecting Other System Keyboard Basic System Diagram of SSC-5000 Log-in Camera control DVR control Main Menu Keyboard Setup RS-485 Communication Setup...
INTRODUCTION SSC-5000 system keyboard is a controller that controls Cameras, DVR, and other devices by using RS-485. An user-friendly on-screen menu, touch screen, and joystick applied, it is easy to operate. Features • Long-distance remote control Through RS-485 communication, remote control is possible up to 1.2 kilometers. (Based on the one System Keyboard) •...
FOCUS control (FOCUS NEAR/FAR) ZOOM control (ZOOM TELE/WIDE) The Pan/Tilt connected with Samsung Dome Camera or Receiver Unit is moved to UP/ DOWN/LEFT/RIGHT. Press the button on the top of Joystick to control the Auto Focus. And use for the zoom control by turning to the clockwise or counterclockwise. The function of UP/DOWN/LEFT/RIGHT keys is controlled in the menu screen of the connected controller.
Back side Name USB Port This is a software uploading port of the System Keyboard. Composite Video IN/OUT This is an AV In / Out port. For RS-485 communication, it will be connected to the RS-485 terminals of other System Keyboards or controlling devices such as cameras, and DVR.
installation INSTALLATION ENVIRONMENT SETUP The following information is prepared for safe installation of the unit. • This unit can be placed on a ﬂat table or installed in the rack. It should not be used vertically or skew, but horizontally. •...
ADJUSTING SYSTEM KEYBOARD ANGLE You may adjust the angle of the product as shown below. FIXING POWER CORD Hang the power cord as shown in the following ﬁgure to prevent it from being deviated when you connect it with the main body.
You can use the SSC-5000 System Keyboard with a camera, DVR, and the other equipments. This chapter describes how to connect each equipment. CONNECTING RS-485 DEVICE - Connect RS-485 Device through the port in the back of SSC-5000.
- Connect TX (+) of the RS-485 port of the DVR to TX (+) of SSC-5000. - Connect TX (-) of the RS-485 port of the DVR to TX (-) of SSC-5000. Connecting as Full Duplex - Connect RX (+) of RS-485 port of the DVR to RX (+) of SSC-5000.
- Connect the TX (-) of SSC-5000 port with the TX(-) of another SSC-5000. In case of connecting with Full Duplex - Connect the TX (+) of SSC-5000 with the TX (+) of another SSC-5000. - Connect the TX (-) of SSC-5000 with the TX (-) of another SSC-5000.
BASIC SYSTEM DIAGRAM OF SSC-5000 One Keyboard to One Device One Keyboard to Multiple Devices (“Daisy-Chain” Type Wiring) Multiple Keyboards to Multiple Devices (“Daisy-Chain”Type Wiring) Do not use together with the SSC-2000/SSC-1000 because it is different with the SSC-2000/SSC-1000 in communication method.
If the key board is not operated for three minutes, the graphic panel is changed to the sleep mode and the screen is not displayed. (Samsung Logo display) Press the touch panel/key or move the joystick/jog shuttle, and then the screen before the sleep mode is displayed again.
On models later than the ALARM VER 1.100, SCC-C6405, movements caught by the camera for 2 minutes will be stored in the PATTERN feature (1~3). If you are transferring data from and to the camera with SSC-5000, please reset before use since the PATTERN may differ from the settings.
instructions PRESET movement Press the [PRESET] button on the keyboard to start PRESET POSITION movement. The screen will appear as shown in the right ﬁ gure. PRESET position movement Enter the preset number you want to operate. Press [ENTER] button. PRESET programming This function is to set the camera screen the user wants to call and monitor whenever he/she wants to.
Clear PRESET mode Press <EXIT> icon on the right below to go out of the PRESET mode. It will return to the camera control mode. CAMERA TITLE input You can title the selected camera. Press the camera title line to call the title input page on the screen. English small letter input page will appear.
Press the <EXIT> icon to clear the camera menu. When you control the menu of SAMSUNG DOME CAMERA, you can use the joystick as a direction or enter key by moving it or after pressing the AF button of it.
Please refer to the manual of each DVR since DVR’s functions are varied depending on the model. Press the [MENU] button on the DVR set, then go to “System ensure that "Samsung System Keyboard" is properly set. The DVR will be controllable after the appropriate settings (ID, baud rate, etc.) are set.
instructions 4. SHR-2XXX Series, SHR-508X, 516X Series Record Mode Freeze Search SHR-5082 Zoom Alarm Audio Eject Select Channel SHR-5082 Controlling the PTZ device connected to the DVR PTZ devices connected to some DVRs may not be controllable, depending on the DVR model. In this case, press the <EXIT>...
DVR channel selection Press the <CH> icon below on the DVR screen. SPR7416 A channel selection screen will appear as shown in the right ﬁgure. Select the channel you want. Press the <EXIT> icon on the lower right to ﬁnish selecting and return to the DVR control screen. DVR channel can be selected by using the number keys (0~9) of the keyboard.
Register New Operation Camera Data Download Camera Data Upload System Information and Setup RS-485 Communication Setup Keyboard Address Set Setup Protocol (Port 1) SAMSUNG Protocol (Port 2) SAMSUNG Baud Rate 9600 Duplex Half Duplex Input Keyboard Address (0~32) Keyboard Setup...
RS-485 communication of the system keyboard supports Camera Protocol as follows. Choose one protocol among SAMSUNG / Pelco-D / Pelco-P / Vicon / Panasonic / Kalatel / Diamond / AD / Philips / Erna / VCL TP / Techwin / Honeywell.
MENU setup New Password Enter the new password. Enter the password by using the number keys (0~9) and press the [ENTER] button. Maximum 6-digit ﬁ gure can be entered. Conﬁ rm New Password This is to conﬁ rm the new password. Enter the password by using the number keys (0~9) and press the [ENTER] button.
Please refer to the ”OPERATOR LEVEL” for the details. (see page 28) CAMERA DATA DOWNLOAD This function is to download the setup data of SAMSUNG DOME. DOWNLOAD check screen If you want to download the data for the ﬁ rst time Download the setup data of the currently selected camera.
A message will appear when downloading is completed. CAMERA DATA UPLOAD This function is to download the data set in SAMSUNG DOME CAMERA and upload them to a new camera. UPLOAD check screen If there is no camera data stored in the system keyboard Camera DATA uploading is not possible.
SYSTEM INFORMATION AND SETUP S/W Version Displays the present version. It is not available to set. Language Displays the present Set language. Press the <Language> to change the language. System keyboard supports English / Français / Deutsch / Español / / Polski/ 中國語...
MENU setup OPERATOR LEVEL There are 3 levels of user, who can be registered as a user, including Admin. / Manager / Operator. Admin is the highest level. The range and limit to the usage of various setup menu and system function depends on the user's level.
VIDEO INPUT/OUTPUT Composite Video 1.0Vp-p, 75ohm, BNC Type, Loop Through out 16 Language (Eng/Fre/Ger/Spa/Ita/Rus/Pol/Kor/Cze/Tur/Chi/Jpa/Bra(Port)/Neth/Denma/Croatia) Pelco-D, Pelco-P, Vicon, Panasonic, GE-Khalatel, Diamond, MULTI PROTOCOL(CAMERA) American Dynamic,Philips,Erna,VCLTP,Samsung Electronics ,Techwin, Honeywell JOY STICK 3D JOY STICK (PAN/TILT/ZOOM) MONITOR, CAMERA, DVR PAN : LEFT / RIGHT...
others TROUBLESHOOTING (FAQ) PROBLEM The system keyboard communication is not worked. The password in the screen of system log in is lost. Replace the LCD panel when its expected life is over. 30_ others SOLUTION • Check the RS-485 communication line. •...
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.