Name And Function Of Each Part - Samsung SSC-5000 User Manual

general facts

NAME AND FUNCTION OF EACH PART

Front side
Name
LCD Display
Camera movement button
ALARM RESET button
Camera lens button
Joystick controller (UP/
DOWN/LEFT/DOWN/ZOOM)
Device select button
(MON/CAM/VMS/DVR)
DVR control button
(SEQUENCE, MODE)
Number (0~9),
ENTER, CLEAR button
MENU button
Jog shuttle
DVR Play button
AUX 1, 2, 3, 4 button
6_ general facts
It shows the operating status of the system keyboard..
PRESET, PATTERN, SCAN, AUTO PAN
Use this to set on or off the alarm.
- IRIS control (IRIS CLOSE/OPEN)
- FOCUS control (FOCUS NEAR/FAR)
- ZOOM control (ZOOM TELE/WIDE)
The Pan/Tilt connected with Samsung Dome Camera or Receiver Unit is moved to UP/
DOWN/LEFT/RIGHT. Press the button on the top of Joystick to control the Auto Focus. And
use for the zoom control by turning to the clockwise or counterclockwise. The function of
UP/DOWN/LEFT/RIGHT keys is controlled in the menu screen of the connected controller.
Press the button of the top to execute ENTER motion.
This key is to select Camera, Monitor, DVR or others.
- SEQUENCE : Executes the SEQUENCE function of DVR.
- MODE : Executes the partition screen selection function of DVR.
This key is to select Camera, Monitor, DVR, Preset, Pattern Number, or others.
This key is to go into the menu mode for the setup of various devices.
- JOG : Is in use for Forward / Reverse Frame search in the playback mode of DVR.
- Shuttle : Executes the Play / Reverse Play / FF / REW functions in the playback mode of
DVR.
PLAY/PAUSE, STOP, FAST FORWARD, REWIND, RECORD
Controls the AUX output of the receiver unit.
Function