Operating Conditions; Wall Fixings - Grundfos PHT-N130 Installation And Operating Instructions Manual

6.9 Operating Conditions.

Electrical supply: 230 V +10 /-6%, 50 Hz
Electrical load:
Model
PHT-N130/PHT-N230
PHT-D125/PHT-D225
PHT-D150/PHT-D250
PHT-F125/PHT-F225
PHT-F150/PHT-F250
PHT-F180/PHT-F280
PHT-T225/PHT-V225
PHT-T250/PHT-V250
Quiescent All models
Pollution Degree: 3
Liquid temperature range: +1°C to +60°C
Relative humidity: 95% (non-condensing)
Usage: Indoor (Outdoor, subject to restrictions found)
Type of protection: Class 1 (earthed) equipment
Equipment type: Stationary, fixed equipment
Construction type: Fixed construction, no moveable parts
EMC Environment: B (light industrial, commercial and residential)
Inlet pressure max: 3 bar

6.10 Wall Fixings.

All units must be mounted/stood in the vertical position.
The PHT-N and PHT-D units are suitable for wall fixing.
The wall fixing dimensions are given below.
Fig 5. – Wall fixing dimensions
Refer to the Product weight table also.
www.grundfos.co.uk
GRUNDFOS INSTRUCTIONS
Power (Watts)
28 W
410 W
900 W
410 W
900 W
1150 W
410 W
900 W
15 W
Noise level: <70 dB(A) at full speed
Ambient temperature: From +1°C to 40°C
Page 11 of 47
Full Load current (Amps)
0.12 A
1.83 A
3.94 A
1.83 A
3.94 A
5.2 A
1.83 A
3.94 A
0.07 A