Menu System - Grundfos PHT-N130 Installation And Operating Instructions Manual

GRUNDFOS INSTRUCTIONS
Use the UP/DOWN arrow keys to get to the required number before pressing the OK key to
confirm. When the OK key is pressed the cursor moves onto the next character.
If the user enters an incorrect password the following screen is displayed for 3 seconds before
returning to the main screen:
Incorrect Password!
If the user enters a correct password, then the relevant access granted message will be shown for 2
seconds before progressing into the menu system:
Example:
User Access
granted

7.5 Menu System.

The menu system opens at the first page in navigate mode.
The arrow at the bottom of the screen indicates that there are further pages.
Page number
01
Parameter
Current Time:
Value
14:25
To enter the edit mode and edit the value press the OK key, the cursor will appear, use the
UP/DOWN keys to change the value. Confirm the new value by pressing OK key.
If the value has two fields then the cursor will automatically move to the next field.
If the page has an arrow at the top, this indicates that there are preceding pages
Once the value of the last field has been confirmed the menu system will return to the navigation
mode. Repeat these operations for all parameters requiring change.
The final screens in the menu allow for the manual operation of the pump(s) via pressing and
holding the OK button. This will activate the pump(s) while the button is held down and is only
active in the Engineering menu.
www.grundfos.co.uk Page 15 of 47