B. Field Transmitter Startup / Configuration
1. First Use
When equipped with TBOS‐II
new features.
Before operation, the Field Transmitter must be charged for 10 hours at least before its first use.
Batteries replacement:
The battery life depends on the daily use of the field transmitter and the backlight on time setting. If
you have to change the batteries, use batteries with same caracteristics (GP NiMH Battery –
GPHCH73 N04 2,4V, 750 mAh).
WARNING : To access to programming screens, the field transmitter has to be set and connected to a
TM
TM
TBOS
/TBOS‐II
Control Module via radio or infra red.
To wake‐up the field transmitter, press Home during 2 seconds.
Once the field transmitter is charged, make the initial settings:
2. Field Transmitter Configuration de la console (Settings Menu)
Proceed to the first setting adjustments :
‐
Date and time settings,
‐
Contrast adjustment,
‐
Setting the name of the field transmitter,
‐
Language selection,
‐
Screen lighting time adjustment,
‐
Defaults setting Restoration,
‐
Field transmitter information display.
All of these settings are made via the ''Settings" menu that can be accessed from the field terminal's
welcome screen, by performing the following steps:
‐
To wake‐up the Field Transmitter,
press Home during 2 sec.
‐
Select "Settings" with the OFF key and
confirm by pressing OK
‐
The different settings will then be
displayed on the screen. Simply select
the parameter your choice.
Setting Time/Date
‐
Select "Date and Time" from the "Settings" menu and confirm by pressing Ok
TM
Radio Adaptor, the old TBOS
9
TM
Control Module is featured with