Default Settings - Melco N10 User Manual

Chapter 4 Appendix
Error
110
Internal drive not found.
111
Usable internal drive not found.
112
Internal drive not found.
113
Internal drive 1 not found.
120
USB drive not found.
121
USB drive not mounted.
122
Only one USB drive can be initialized.
Remove 2nd/3rd USB drive first.
140
No backup drive found.
141
Backup drive not mounted.
200
No accounts found.
203
Could not connect to the site.
204
Authentication error.
300
This CD's music data is currently unavailable.

Default Settings

Display
SMB File Sharing
Periodic Downloads
Import from USB drive
Controller Mode
DSD Playback Mode
Precision Start Latency
CD-DA Import File Format
Maximum Read Count
Advanced Drive Optimization
Auto Power Save
LAN Port
Player Port
Friendly Name (Hostname)
Check for Updates at Start-Up
Respective Corrective Actions
Try restarting the N10/N100. If the message is still displayed,
contact our technical support for assistance.
The connected USB drive may be malfunctioning. Try another
USB drive.
Make sure only one USB drive is connected to the N10/N100
when formatting.
Make sure the backup drive that contains backup data is
connected to the USB 2.0 port.
Add an account.
Put the N10/N100 on a network that can access the Internet.
Make sure that the username and password are correct.
The music database server may be under maintenance. Please
wait for a while and try again later.
Brightest
On
Off
Into One Folder
Hybrid Mode
Standard
3 seconds
WAV
1
±0
15 minutes
Note: This setting may be configured to "Off" for some units.
DHCP
Bridged Mode
N-XXXX ("X" stands for the last four digits of MAC address)
Yes
53