Updating The Firmware; Updating Via The Network - Melco N10 User Manual

Chapter 3 Advanced Usage
3
Press the Up/Down buttons (
( ).

Updating the Firmware

To update the N10/N100's firmware version to the latest one, follow the procedure below.

Updating via the Network

Note: To update the firmware via the network, the N10/N100 should be connected to the Internet. If the N10/N100
is in isolated mode, use another Ethernet cable and connect it to the LAN port and the router.
1
Press the Menu/Enter button (
2
Press the Up/Down buttons (
3
Press the Up/Down buttons (
) and select the display language, then press the Menu/Enter button
) to display the menu list at the home screen.
) and select "System Update", then press the Menu/Enter button (
) and select "Internet", then press the Menu/Enter button (
43
).
).