Backing Up - Melco N10 User Manual

Chapter 2 Basic Usage
File System
NTFS
HFS Plus without Journaling
FAT32
exFAT
Notes:
• Use only the compatible USB drives listed on melco-audio.com.
• The data will be kept even if the USB drive already contains the backup data in it and a backup job runs.
• To use differential backup for FAT32 or exFAT-formatted USB drives, format it by selecting "Format" in the window
below. All data will be erased and the file system will change to NTFS when formatting.

Backing Up

To back up imported music files, follow the procedure below.
1
Connect the USB drive to the USB 2.0 port. If you connect the USB drive that contains the N10/N100's backup
data, you can also use it for the differential backups.
2
Press the Up/Down buttons (
3
Press the Menu/Enter button (
4
Press the Menu/Enter button (
Mode
Differential backup
Full backup
) and select "Backup or Restore", then press the Menu/Enter button (
).
) to display the menu list at the home screen.
25
Files Included
Only files with different sizes and times from on the
previous backup will be saved. If file contents and
location (path) remain the same since the previous
backup job, these files will not be backed up. When
the file location changes, that file will be backed up
even if the contents have not changed.
All files will be backed up.
).