Chapter 2 Basic Usage
4
Press the Up/Down buttons (
(
).
5
Press the Up/Down buttons (
6
Press the Menu/Enter button (
Note: Depending on your USB-DAC, the beginning of a music file may not count as initial playback if the sampling
rate has changed between music files or if playing DSD files. In such a case, go to Settings > USB-DAC > Precision
Start Latency and set a gap time. This gap time will be added to the first track of the playlist. The default gap time is 3
seconds.
If the default value works correctly, the switch to the next music file will become faster when you make the gap time
shorter.
Backing Up and Restoring
Backup Operations
With this operation, both music files and settings are backed up. Backed up music files can be restored if the files are
deleted.
Backup operations will vary depending on the file system of the connected USB drive. Differences between backup
modes are below:
) and select "DSD Playback Mode", then press the Menu/Enter button
) and select the playback mode, then press the Menu/Enter button (
).
24
).