Restoring - Melco N10 User Manual

Chapter 2 Basic Usage
5
Press the Up/Down buttons (
6
Press the Up/Down buttons (
7
When the following message is selected, the full backup will run if you press the Menu/Enter button (
you want to run the differential backup, press the Back button (
8
Press the Menu/Enter button (
9
Disconnect the USB drive.
Note: Backed up data will be saved in the following folder:
".Anas.bak" - MAC address - backup date and time - "disk1"
Normally, a folder that contains a period in its name is treated as a hidden folder. Hidden folders cannot be
displayed unless a specific setting on a computer is changed. To access the ".Anas.bak" folder from a computer,
change its hidden folder settings beforehand.

Restoring

To restore the backup data, follow the procedure below. Restoring from backup will delete all current data on
the N10/N100. If needed, back up any data before continuing.
1
Connect the backup USB drive that contains the backup data to the USB 2.0 port.
) and select "Backup", then press the Menu/Enter button (
) and select "Start Backup", then press the Menu/Enter button (
).
26
) to stop the backup process.
).
).
). If