VeriFone Vx 520 Instruction Manual page 6

•
the PP1000SE V3 PIN pad has no its own power source – it draws current after the connection to the
RS-232 socket in the terminal. This means that after the disconnection of the power source from the
terminal the power of the PIN pad is also disconnected.
CONNECTING THE PIN PAD CABLE TO THE RS-232 SOCKET IN THE TERMINAL
1.2.1.2 Connecting the terminal to the power source
TURNING ON: The deactivated terminal can be turned on by connecting it to the power source.
TURNING OFF: The activated terminal can be turned off by disconnecting it from the power source.
In order to connect the terminal to the power source:
The payment application is activated automatically when the device is turned on.
CONNECTING THE TERMINAL TO THE POWER SOURCE:
1. Take off the lower terminal cover
2. Insert the round end of the PSU to the power socket in the terminal
3. Connect the PSU plug to the electrical socket
FIGURE
1
FIGURE CONNECTING THE PIN PAD TO THE TERMINAL
2
CONNECTING THE TERMINAL TO THE POWER SOURCE
ITCARD • Planet Cash • Planet Pay • Planet Plus
6