Performance Specifications; A.3 Performance Specifications - Emerson Smart Wireless THUM Adapter Reference Manual

Appendix A: Reference Data
March 2014
Paint - Polyurethane
M20-Conduit Adapter - SST
M20-Conduit Adapter O-ring - Buna-n
Antenna
Poly butadine terephthalate (PBT) / Polycarbonate (PC) integrated omnidirectional antenna
Weight
THUM Adapter only AL - 0.65 lbs. (0.29 kg)
THUM Adapter only SST - 1.1 lbs. (0.5 kg)
AL THUM Adapter with AL remote kit - 3.2 lbs. (1.45 kg)
SST THUM Adapter with SST remote kit - 5.8 lbs. (2.65 kg)
AL THUM Adapter with M20 conduit adapter - 0.85 lbs. (.038 kg)
SST THUM Adapter with M20 conduit adapter - 1.3 lbs. (0.59 kg)
Enclosure ratings
Housing option code D is NEMA 4X, and IP66.
Mounting
The THUM Adapter may be attached directly to the conduit of any 2- or 4-wire HART device or
mounted remotely by using the remote mount kit.
A.3

Performance specifications

ElectroMagnetic compatibility (EMC)
All Models:
Meets all relevant requirements of EN 61326-1 (2006) when installed with shielded wiring. The
sub-device must also use shielded wiring for installation.
Vibration effect
Output unaffected when tested per the requirements of IEC60770-1 field with general
application or pipeline with low vibration level (10-60 Hz 0.15 mm displacement peak
amplitude / 60-500 Hz 2g).
When the THUM Adapter is used on wired devices that are subject to vibration levels greater
than 2g, it is recommended that the THUM Adapter be remotely mounted using the remote
mount kit.
Temperature limits
Operating Limit
–40 to 185 °F
–40 to 85 °C
Output specifications
The THUM allows Wireless communication between the HART device it is connected to and the
Smart Wireless Gateway.
40
Storage Limit
–40 to 185 °F
–40 to 85 °C
Reference Manual
00809-0100-4075, Rev CA
Reference Data