Performance Specifications - Emerson Smart Wireless THUM Reference Manual

Smart Wireless THUM Adapter
PERFORMANCE
SPECIFICATIONS
A-2
Weight
THUM Adapter only AL - 0.65 lbs. (0.29 kg)
THUM Adapter only SST - 1.1 lbs. (0.5 kg)
AL THUM Adapter with AL remote kit - 3.2 lbs. (1.45 kg)
SST THUM Adapter with SST remote kit - 5.8 lbs. (2.65 kg)
AL THUM Adapter with M20 conduit adapter - 0.85 lbs. (.038 kg)
SST THUM Adapter with M20 conduit adapter - 1.3 lbs. (0.59 kg)
Enclosure Ratings
Housing option code D is NEMA 4X, and IP66.
Mounting
The THUM Adapter may be attached directly to the conduit of any 2- or 4-wire
HART device or mounted remotely by using the remote mount kit.
ElectroMagnetic Compatibility (EMC)
All Models:
Meets all relevant requirements of EN 61326-1 (2006) when installed with
shielded wiring. The sub-device must also use shielded wiring for installation.
Vibration Effect
Output unaffected when tested per the requirements of IEC60770-1 field with
general application or pipeline with low vibration level (10-60 Hz 0.15 mm
displacement peak amplitude / 60-500 Hz 2g).
When the THUM Adapter is used on wired devices that are subject to
vibration levels greater than 2g, it is recommended that the THUM Adapter be
remotely mounted using the remote mount kit.
Temperature Limits
Operating Limit
–40 to 185 °F
–40 to 85 °C
Output Specifications
The THUM allows Wireless communication between the HART device it is
connected to and the Smart Wireless Gateway.
Storage Limit
–40 to 185 °F
–40 to 85 °C
Reference Manual
00809-0100-4075, Rev BA
October 2010