Emerson Smart Wireless THUM Adapter Reference Manual page 3

Hide thumbs Also See for Smart Wireless THUM Adapter:
Table of Contents

Advertisement

Reference Manual
00809-0100-4075, Rev CA
Smart Wireless THUM™ Adapter
Smart Wireless THUM™ Adapter Hardware Revision
®
HART
Field Communicator Field Device Revision
NOTICE
Read this manual before working with the product. For personal and system safety, and for
optimum product performance, make sure to thoroughly understand the contents before
installing, using, or maintaining this product.
The United States has two toll-free assistance numbers and one international number.
Customer Central
1 800 999 9307 (7:00 a.m. to 7:00 p.m. CST)
National Response Center
1 800 654 7768 (24 hours a day)
Equipment service needs
International
1 952 906 8888
The products described in this document are NOT designed for nuclear-qualified
applications.
Using non-nuclear qualified products in applications that require nuclear-qualified
hardware or products may cause inaccurate readings.
For information on Rosemount nuclear-qualified products, contact an Emerson Process
Management Sales Representative.
Explosions could result in death or serious injury:
Installation of this transmitter in an explosive environment must be in accordance with the
appropriate local, national, and international standards, codes, and practices. Please review
the Product Certifications section for any restrictions associated with a safe installation.
Electrical shock can result in death or serious injury:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
conditions. This device may not cause harmful interference. This device must accept any
interference received, including interference that may cause undesired operation.
This device must be installed to ensure a minimum antenna separation distance of 20 cm
from all persons.
Device Revision
Before connecting a Field Communicator in an explosive atmosphere, ensure the
instruments are installed in accordance with intrinsically safe or non-incendive field
wiring practices.
Avoid contact with the leads and terminals. High voltage that may be present on leads
can cause electrical shock.
1
1
Dev v2.5 DD v4
iii

Advertisement

Table of Contents
loading

Table of Contents