4Section 4: Commissioning; Safety Messages; Warnings - Emerson Smart Wireless THUM Adapter Reference Manual

Hide thumbs Also See for Smart Wireless THUM Adapter:

Table of Contents

Reference Manual

00809-0100-4075, Rev CA

Section 4

Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 29

Device network configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 30

4.1

Instructions and procedures in this section may require special precautions to ensure the safety

of the personnel performing the operations. Information that potentially raises safety issues is

indicated by a warning symbol ( ). Please refer to the following safety messages before

performing an operation preceded by this symbol.

4.1.1

Failure to follow these installation guidelines could result in death or serious injury:

Explosions could result in death or serious injury.

Electrical shock could cause death or serious injury.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

conditions: This device may not cause harmful interference. This device must accept any

interference received, including interference that may cause undesired operation.

This device must be installed to ensure a minimum antenna separation distance of 20 cm

from all persons.

Commissioning

Only qualified personnel should perform the installation

Before connecting a Field Communicator in an explosive atmosphere, make sure that

the instruments are installed in accordance with intrinsically safe or non-incendive

field wiring practices

Verify that the operating atmosphere of the transmitter is consistent with the

appropriate hazardous locations certifications

Use extreme caution when making contact with the leads and terminals

Section 4: Commissioning

March 2014

Table of Contents