5.
Ture the breadmaker upside down. Remove four
lege and base cover by unscrewing. Pull out the
power cord assembly on the bottom of the unit.
Remove the chassis assembly from the out case.
6.
Remove the poly V-belt.
Remove nut and pulley washer, then kneading
pulley can be disconnected.
Remove the E-ring, washer, and pulley shaft
assembly.
7.
Remove the motor pulley from the motor shaft by
removing one machine screw. Remove three fix-
ing screws, then the kneading motor and motor
cushion can be disassembled.
-13-
Need help?
Do you have a question about the HB-155CJ and is the answer not in the manual?
Questions and answers