Sensit HXG-3 Quick Start Instructions

HINT: As you approach the source of the
leak, keep dialing down the rate of the
audible "tick" by dialing down the thumb
wheel which is located on the right side of
the instrument.
IMPORTANT: When replacing
gooseneck into the clip on the right side,
wrap the gooseneck in a wide circular
manner counter-clockwise around the back
of the instrument. Bending in the opposite
direction may cause damage over the life of
the product.
WARNINGS:
To prevent ignition of flammable or combustible
atmospheres, disconnect power before servicing.
To reduce the risk of ignition of a flammable
atmosphere, batteries must only be changed in
an area known to be nonflammable.
Do not mix batteries of different age or type.
ONLY zero instrument in a gas free environment.
To maintain intrinsic safety, service must be
performed by factory authorized technicians
with approved replacement parts only.
the
Quick-Start Instructions
This is not a substitute for the
instruction manual. It is for
reference only.
Read and understand the
instruction manual before use.