Quick Reference Guide/Assembly; Blender Jar Operation - Cuisinart Hurricane CPB-380C Instruction And Recipe Booklet

QUICK REFERENCE GUIDE
To activate blender Place vessel fitted with blade
assembly onto base
To begin blending Turn dial to desired speed
To change speeds Turn dial to desired speed
To pulse Turn dial left to Pulse
To stop blending Turn dial to OFF
ASSEMBLY
After washing all parts, please see below for assembly. Place base on flat
surface and plug in.
Blender Jar Travel Cup
Assembly Assembly
1. Turn blender jar 1. Place cup on flat
upside down. surface upright. Add
ingredients.
2. Place blade assembly
on the round opening 2. Attach blade
of the jar and turn assembly on round
counterclockwise opening of the cup
until tightened. and turn counter-
clockwise until
3. Stand jar upright.
tightened.
Place on blender
base and secure into 3. Place on blender
place. base.
4. Add ingredients to be 4. Turn clockwise to
blended, place cover lock.
with pour lid in place
on blender jar.
Chopping
Cup Assembly
1. Place cup on flat
surface upright. Add
ingredients.
2. Attach blade
assembly on round
opening of the cup
and turn counter-
clockwise until
tightened.
3. Place on blender
base.
4. Turn clockwise to
lock.

BLENDER JAR OPERATION

1. With the base unit on the tabletop and unit plugged in, place the blender jar
assembled with the blade assembly onto the base and secure into place.
NOTE: Blade assemblies are interchangeable based on recipes and desired end
results.
2. Add food ingredients, beginning with liquid and soft items and finishing with harder
items like ice and frozen fruit. Replace the cover. You may add more ingredients by
lifting the measured pour lid and dropping ingredients through the fill area. Replace
the pour lid after adding ingredients.
Do not put hands into blender jar while device is plugged in.
NOTE: To remove blender jar cover, lift edge of cover upward. Do not use
measured pour lid to remove cover.
3. For continuous blending, turn dial to the desired speed. It is possible to switch
between High and Low speeds by simply turning the rotary dial.
4. To pause the blending process, turn the rotary dial to the OFF position.
The blending process will stop. To restart blending, rotate dial to desired speed.
5. To pulse, turn the dial to Pulse. Hold, then release after desired run time. Repeat
as needed. The Pulse function can be used to break apart larger pieces of food.
The Pulse function is also effective for starting the blending process when you do
not want continuous power, or for processing items that do not require an
extended amount of blending. Dial will automatically return to the OFF position
upon release.
6. When you have finished blending, turn the dial to OFF. Then remove the blender
jar from the base. Pour out ingredients. NEVER TOUCH THE BLADE ITSELF.
Unplug the unit.
4