Enabling The Infrared Port - Samsung M6000 Series User Manual

IRQ Component (Windows 98)
0 System timer
1 Keyboard
2 Internal Controller
3 COM 2, COM 4
4 COM 1, COM 3
5 Sound
6 Floppy controller
7 LPT1 (parallel port)
8 CMOS/Clock
9 USB
10 (available)
11 CardBus
12 Touchpad, PS/2 mouse
13 Numeric data processor
14 IDE 1 (hard drive)
15 IDE 2 (CD-ROM drive)
In Windows 98, you can configure a device so that the device is
disabled when you connect your computer to a docking station but
enabled when the computer is not connected to the docking station.
With this configuration, an IRQ is available for a peripheral device that
you connect to the docking station. See your docking station manual for
more information.

Enabling the Infrared Port

If your computer's operating system is Windows 98, you can enable
and use the infrared port. The Windows NT 4.0 operating system does
not support infrared.
If you are unable to transfer files with the infrared port, check the
following:
Samsung M6000 User's Manual
Table 8. Samsung M6000 Series IRQs
Component (Windows NT
System timer
Keyboard
Internal Controller
(available)
COM 1, COM 3
Sound
Floppy controller
LPT1 (parallel port)
CMOS/Clock
(available)
(available)
CardBus
Touchpad, PS/2 mouse
Numeric data processor
IDE 1 (hard drive)
IDE 2 (CD-ROM drive)
About Drivers and System Resources 81