Samsung M6000 Series User Manual page 64

Samsung notebook users manual
Table of Contents

Advertisement

specify a Standby Timeout delay time of from 1 to 16 minutes. The
default is 1 Minute.
Suspend Mode: Specifies the type of suspend mode your computer
enters:
Auto Suspend Timeout: Sets the period of computer inactivity (no
user input or device activity) that must pass before your computer
enters suspend mode. You can disable this option by selecting Off, or
you can specify a Standby Timeout delay time of from 5 to 60 minutes.
The default setting is 5 min.
Resume On Modem Ring: Enables the computer to resume operation
from suspend mode in the event of modem communication. The
computer will resume only if the Suspend Mode field is set to Power
On Suspend, not Save To Disk. The default setting is Off.
Resume On Time: Enables the computer to resume operation from
suspend mode at a scheduled time. The computer will resume only if
the Suspend Mode field is set to Power On Suspend, not Save To Disk.
If you set this field to On, you must set the Resume Time field as well.
The default setting is Off.
Resume Time: Specifies the time for your computer to automatically
resume from suspend mode. Enter two-digit numbers to indicate the
hour, minutes, and seconds in the format hh:mm:ss. Use a 24-hour
clock. Use the tab key to move between the hour, minute, and second
Samsung M6000 User's Manual
Suspend (default): Saves power by turning off the

microprocessor and DMA clocks, video, and all controllable
peripheral devices. Some power is still used when your system
is in this mode. This suspend mode is also known as suspend to
RAM.
Save To Disk: Provides the greatest power-saving capabilities

by essentially turning off your computer. In the save to disk
mode, all system logic (except for your computer wakeup
circuitry and battery charger) is turned off. During save to disk
mode, the DRAM and video memory are saved to the hard
drive and are restored when your computer resumes from
suspend.
When the computer enters save to disk mode, it will not
resume normal operation at a specified time no matter how the
Resume On Time field is set.
Using System Setup 53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents