Connecting the Speakers
HT-TX22
Front Speaker (R)
Rear Speaker (R)
HT-TX25
Front Speaker (R)
Rear Speaker (R)
14
(Con't)
Center Speaker
Front Speaker (L)
SPEAKER
STAND
Rear Speaker (L)
Subwoofer
Center Speaker
Front Speaker (L)
Rear Speaker (L)
Subwoofer
Speaker Installation
With the HT-TX22 front speakers and HT-TX25 front/rear speakers, you have the option of installing the speakers on
Stands, or directly to the Stand Base.
Speaker Components
(HT-TX22/HT-TX25 only)
SPEAKER
STAND
STAND BASE
How to Install the Speaker on the Stand
1
2
1
2
3
3
4
4
5
6
5
6
How to Install the Speaker on the Stand Base
1
2
1
2
3
3
Screw (A)
Screw (B)
Turn the STAND upside-down and connect it to
the STAND BASE.
Insert two screws (A) into the two holes marked with arrows
using a screwdriver as shown in the illustration.
Insert a screw (B), into the hole on the rear of the Speaker
STAND.
Connect the assembled stand to the SPEAKER.
Insert another screw (B) into the hole on the rear of the
speaker using a screwdriver as shown in the illustration.
This is the SPEAKER successfully assembled with
the Stand.
• Make sure that the speaker is installed on a flat and stable area.
Otherwise it may be easily knocked over.
Connect the SPEAKER with the STAND BASE.
Insert the screw (B) into the hole on the rear of the speaker
using a screwdriver as shown in the illustration.
This is the SPEAKER successfully assembled with
the Stand Base.
GB
15