Connecting External Components - Samsung HT-DB390 Instruction Manual

Connecting External Components

Connecting an External Digital Component
Example: Digital signal components such as a Settop Box or CD Recorder.
Optical Cable
(not included)
1
Connect Video Out on the DVD player to Video In on the TV.
2
Connect the Digital Input (OPTICAL) to the Digital Output on the external
digital component.
3
Press AUX on the remote control to select 'DIGITAL IN'.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD DIGITAL IN
17
DIGITAL OUT VIDEO OUT
VIDEO IN
AUX 1 AUX 2.
AUX1 AUX2 FM AM.
Connecting an External Analog Component
Example: Analog signal components such as a VCR or TV.
Audio Cable
If the external analog
component has only one
Audio Out, connect
either left or right.
L R
AUDIO OUT
1
Connect Video Out on the DVD player to Video
In on the TV.
2
Connect Video In on the DVD player to Video
Out on the external analog component.
3
Connect Audio In on the DVD player to Audio
Out on the external analog component.
•
Be sure to match connector colors.
4
Press AUX on the remote control to select AUX 1
or AUX 2.
•
Each time the button is pressed, the selection changes as
follows: DIGITAL IN AUX 1 AUX 2.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD DIGITAL IN
AUX1 AUX2 FM AM.
Video Cable
VIDEO OUT
VIDEO IN
Note
•
If you have connected an external digital
component and Video In (1, 2) at the
same time, there will be video from AUX 1
even when you select DIGITAL IN.
•
If you have connected Audio In (L, R) to
1, connect Video In to 1 as well, and if
you have connected Audio In (L, R) to 2,
connect Video In to 2 also.
18