Advertisement
Sport Bar Covers - Installation Instructions
Install Sport Bar Cover
8
to Rear Legs
Drape the cover over the Rear Sport Bar and
Fit the curve in the fabric over the curve of the
bar. There will be a pre-cut hole for the seat
belt, hook the hole of the fabric around the seat
belt mount. Zip up the lower portion of the cover
and start to zip the upper portion. The start and
end of the two zippers can be tucked behind the
seat belt mount.
Rear Sport Bar
Cover
Rear
View from Outside
Passenger Side
Start Upper Zipper
Rear
View from Outside
Passenger Side
Rev. B 1106
9
9
Position & Zip Upper Leg
Continue to zip the upper portion of the rear leg towards the
front. Before you tighten the fabric with the zipper, position the
pre-cut holes over the speaker pod holes on the sport bar.
Rear Sport
Bar Cover
Seat Belt
Lower Zipper
10
11
8
Pre-cut Holes Over
Center Sport
Speaker Pod Holes
Bar Cover
Zip Upper Portion
Snap Flap
10
The zippers for the center, side and rear bar
should all intersect above the front seat belts.
Pull the flap over from the side and snap it to
the fabric assembly.
Center Zipper
Snap Flap to
Center Sport Bar
Center Bar
Front
Rear Zipper
Stops Here
Side Zipper
Stops Here
Snap Flap to Side
View from Inside
Passenger Side
Secure Front Seat Belt
11
Casing
After the flap is snapped and the fabric is
adjusted around the seat belt mount, secure
the Seat Belt Casing. Press the panel down
into the clamps underneath.
Front seat
belt casing
Side Flap
NOTE
The Clamps should be exposed and
free from fabric coverage.
80022 / 80023 pg. 4
Advertisement
