Advertisement
Sport Bar Covers - Installation Instructions
5
7
Install Sport Bar Cover
6
to Sides
Wrap fabric assembly around the sides tucking the
fabric under the front seat belt casings. The larger
pre-cut holes should be position around the clamps
under the casing. The clamps mst be exposed to
secure the seat belt casing.
Back
Pre-Cut
Holes
Rev. B 1106
5
Orient the entire fabric assembly over the Vehicle's Sport Bars with the zippers towards the
underside of the bars. The Bestop ® label should be on the rear leg of the passenger's side
and there should be some pre-cut openings for the seat belts and the speaker pods.
Locate the two sets openings on the center bar.
The ones closer to the center will expose the
holes for the speaker pod's rod and the
outer two holes are for it's wiring. Pull the
wires through the outer holes. Zip the
fabric assembly around the center bar.
6
Front
Seat Belt
Mounts Here
Clamps
View from Outside Passenger's
Side - with the Seat Belt and Casing
Removed.
Install Sport Bar Cover to Center Bar
7
Expose Pivot Brackets
If you have a soft top, insert the Pivot Bracket Flanges
through the slits in the fabric. The TJ Wrangler ('03-'06)
has two Flanges and the TJD Wrangler Unlimited ('04-'06)
has only one.
Pull Casing Away
from Bar
Pivot Bracket
Flanges
Tuck Fabric Under
Seat Belt Casing
Inner Hole
Outer Hole
Front Horizontal
Bar
View from Driver's Side
Seat Belt
Front
View from Outside
Passenger Side of TJ Wrangler
80022 / 80023 pg. 3
Center Bar
Pull wire
through hole
Advertisement
