Dental phantom images should be acquired with fixed settings for X-ray dose (kV, mA,
distance), and a fixed and reproducible alignment of the X-ray source and the dental
phantom to the FS Ergo sensor.
NOTICE! Contact technical support for recommendations about commercially
available dental phantoms.
Display
Refer to your software manual for instructions on how to ensure good display settings
and image display properties. It is recommended to view images on an SVGA monitor
with at least 1,024 x 768 pixel resolution at 0.25 to 0.26 dot pitch or better and 24-bit
true color (32-bit preferred), in native resolution.
FS Ergo Sensor
6 Maintenance
29