Autodiagnostic Leds - golmar RD-V2PLUS Instruction Manual

9
*
If the short circuit is eliminated before
2 minutes (approx.), the repeater will
automatically reset. Past this time it
will be necessary to press button 'P1'
to restart the repeater.
(See description page 47).

AUTODIAGNOSTIC LEDS

D
The autodiagnostics LEDs are placed on the top right
of the digital repeater.
Green Led
Fixed: Correct operation.
Blinking: Riser communicating.
Off : Riser not functioning due to a short-circuit in the
riser * between the bus wires.
Red Led
Fixed: P ower supply connected
OFF: Power supply disconnected.
escription of autodiagnostic LEDs.
.