Description Of The Repeater; Installation Of The Repeater - golmar RD-V2PLUS Instruction Manual

DESCRIPTION
D
escription of the repeater.
INSTALLATION
D
etail of the repeater installation.
Install the repeater
To avoid damage, the
The repeater can be installed on a DIN guide
(6 elements), pressing it lightly.
To extract the repeater
use a plain screwdriver to lever the flange as
shown in the picture.
in a dry and protected place without risk of drip or water projections.
repeater must be firmly fixed.
The installation or modification the
The installation and handling of the
To install the
from the DIN guide,
Autodiagnostic LEDs.
Reset button 'P1', for short-circuit Bus
(riser where repeater is connected).
Label.
connection block
Bus
Power supply input
(with FA-V2Plus power supply).
DIN rail latch release.
performed
in the absence of electrical current
performed by
authorized personnel.
repeater directly on the wall, drill two holes
of 6mm. and insert the wallplugs. Fix the
with the specified screws.
DIN 46277
.
repeater, must be
.
repeater must be
repeater
8