Installation Of Replacement; Cable, Sections And Distances Chart (One Access And One Riser) - golmar RD-V2PLUS Instruction Manual

Digital repeater

Hide thumbs

Table Of Contents

Table of Contents

Coming from previous page

SECTIONS CHART

Terminal

BUS, D

+, -

(d.c lock release)

CV1,CV2

(a.c lock release)

CV1,CV2, ~, ~

Maximum distance of 150 meters between multiplexer and last monitor/telephone and between

( ) 3

monitors/telephones of different apartments (in the same riser) connected to multiplexer.

IMPORTANT

if the installation includes multiplexers in daisy chain with monitors B/W:

- Maximum distance between door panel/converter and multiplexer:150m.

- Maximum distance between multiplexer in daisy chain and the last monitor B/W and between monitors

of different apartments (in the same riser) connected to multiplexer in daisy chain will be:100m.

Golmar has a special cable for this system, its reference number is

( ) 1

ensures the correct functioning of the system and simplifies the riser replacement given that it contains

all the necessary wires for the installation.

ompatibility of cables and sections.

Cables and distances chart

Cables and sections

0,25mm (twisted).

0,5mm (twisted).

1mm (twisted).

1,5mm

(twisted).

0,18mm (multipaired).

0,18x2= 0,36mm (multipaired).

0,18x4= 0,72mm

Rap-2150 1mm (twisted).

1 par UTP Cat 5 0,18mm.

2 par UTP Cat 5 0,18x2= 0,36mm.

4 par UTP Cat 5 0,18x4= 0,72mm.

: The distance to increase with

IMPORTANT

ontact our technical support department

Use Golmar RAP-2150 cable, for new installations.

Several accesses and risers

Door

panel-Multiplexer

200m.

( ) 1

RAP-2150