Panel Descriptions; Battery Charging; Calling Procedures - Icom IP100H Instructions

PANEL DESCRIPTIONS

D Front and side panels
External antenna connector
Attach the supplied antenna.
Or, attach the supplied antenna connec-
tor cap, if the internal antenna is used.
CAUTION: NEVER HOLD just the at-
tached antenna when carrying the
communication terminal.
[PTT] button
During half-duplex mode, hold down to
transmit, and release to receive.
During full-duplex mode, push to make a
call.
[Option] button
Push to hangup a telephone call.
Or, selects one of often used message or
ID, depending on the programming.*
Internal microphone
When VOX (Voice Operated transmis-
sion) function is used, the internal micro-
phone cannot be used.
D Function keys
[ ] (Address) key
Push each time to select an address-
book from All, Group, Individual and
Telephone.
• Selectable addressbook may differ accord-
ing to the IP1000C settings.
• Push [ J]/[K] to select a desired address.
[ ] (Call History) key
Push each time to select call history from
TX log, RX log, TX MSG log, RX MSG
log, TX TEL log and RX TEL log.
• Push [ J]/[K] to select a desired log.
[J] (Up)/[K] (Down) keys
Push to select a desired address (ID),
log, message, presence (status) or area
call function.
[PWR/VOL] knob
Turns ON and OFF the communication
terminal power and adjust audio output
level.
Function display
[ / ] jack
(External microphone/speaker jack)
Connects an optional speaker-micro-
phone or headset for hands-free, full-du-
plex operation.
CAUTION: Attach the jack cover when
the optional equipment is not used.
Be sure to turn power OFF before con-
necting or disconnecting optional equip-
ment to or from the [ / ] jack.
Function keys
See "D Function keys" for details.
Internal speaker
When an optional speaker-microphone
or headset is connected, the internal
speaker cannot be used.
[FUNC] key
After a desired address selection, push
each time to select a message, presence
(status) or the area call function select
status.
• Selectable function may differ according to
the IP1000C settings.
• Push [ J]/[K] to select a desired message,
status or the function setting.
[CLR• ] (Clear•Lock) key
• Push momentarily to select a stand-by
screen.
• Hold down for 1 second each time to
turns ON or OFF the key lock function.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor-
porated (Japan) in Japan, the United States, the United Kingdom, Germany,
France, Spain, Russia and/or other countries.
All other products or brands are registered trademarks or trademarks of their
respective holders.
Morisawa font is used in this product.

BATTERY CHARGING

D Using the BC-202
The BC-202 rapidly charges of the Li-ion battery pack.
Charging time for the BP-271: Approximately 2 hours
Charging time for the BP-272: Approximately 3.5 hours
The following item is required.
• An AC adapter (not supplied with some versions).
Turn OFF the power. Battery pack
Transceiver
+ Battery pack
AC outlet
Tapping screws
AC adapter
3.5×30 mm
(Optional)
Charging
lamp
Desktop charger
Optional: BC-202

CALLING PROCEDURES

D Voice communication
Push [ ] several times to select a desired addressbook.
q
• Select All for all stations call, Group for group call, Individual
for individual station call or Telephone for extension call.
• Selectable adressbook may differ according to the IP1000C's
setting.
Push [ J]/[K] several times to select a desired ID or ex-
w
tension number.
• Selectable ID or extension number may differ according to the
IP1000C's setting.
• You can select a desired ID or extension number from call his-
tory by pushing [ ] for easy recalling.
Push [PTT], then speak into the microphone.
e
Release [PTT] to listen.
r
t Repeat the steps e and r.
When full-duplex mode is selected at the IP1000C, the steps
r and t are not necessary. Just speak into the microphone
of the connected headset, the received audio is heard from
the headset speaker at the same time.
When hanging up the extension call communication, push
[Option].
D Using the BC-211
The BC-211 rapidly charges up to 6 battery packs.
Charging time for the BP-271: Approximately 2 hours
Charging time for the BP-272: Approximately 3.5 hours
The following item is required.
• An AC adapter or the DC power cable (OPC-656)
Turn OFF the power
Battery pack
Transceiver
+ Battery pack
AC outlet
Multi-Charger
BC-211
AC adapter
(BC-157S)
D Text communication
Push [ ] several times to select a desired addressbook.
q
• Select All for all stations call, Group for group call, Individual
for individual station call or Telephone for extension call.
• Selectable adressbook may differ according to the IP1000C's
setting.
Push [ J]/[K] several times to select a desired ID or ex-
w
tension number.
• Selectable ID or extension number may differ according to the
IP1000C's setting.
• You can select a desired ID or extension number from call his-
tory by pushing [ ] for easy recalling.
Push [FUNC] several times to select a desired item.
e
• Select Message for message transmission, Presence for sta-
tus transmission, or Area for a limited area call.
Push [PTT] to make a call.
r
• Message or status is transmitted.
• If Area is selected in the step e, go to the next step.
t While holding [PTT] speak into the microphone to an-
nounce a message.