Setting The Time; Preparing The Coffee Machine For The Brewing Process - Medion Micromaxx MD 15486 Instruction Manual

7.1. Setting the time

 Once the device has been connected to the power supply for the first time, the
time display will flash (12:00).
 Press the MINUTE and HOUR buttons to set the time.
 As soon as either the MINUTE or HOUR button has been pressed, the time dis-
play will stop flashing and the time will be set.
7.2. Preparing the coff ee machine for the brewing
process
 Open the lid of the water tank and fill it with the required volume of cold water
for the desired number of cups using the scale on the water tank.
NOTE
As a result of the evaporation of water during the boiling process, the
water level indicator on the water tank will not correspond exactly with
the water level indicator on the glass jug. Only use the water level indi-
cator in the water tank for filling the coffee machine.
 Remove the glass jug from the warming plate and press the OPEN button to
open the filter compartment.
 Place the filter insert into the recess in the filter holder. The filter insert can only
be inserted into the filter holder in one direction.
 Place a paper coffee filter (size 1x4) or the supplied permanent filter into the fil-
ter holder. Ensure that the filter is positioned evenly in the filter insert.
 Close the filter holder again.
 Position the glass jug in the middle of the warming plate and ensure that the jug
is positioned precisely underneath the filter holder.
 The glass jug can only be inserted and removed at the front of the coffee ma-
chine.
28 of 118